Basler Electric CLASS 300 EQUIPMENT MVC-300 ELECTRONIC MANUAL VOLTAGE CONTROL

The Electronic Manual Voltage Control MVC-300 is a solid-state device en

closed by a wrap-around metal chassis. The MVC-300 is for mounting through

a panel with controls accessible from the front of the panel or can be mounted

behind the panel. A terminal strip located on the rear of the device facilitates

installation. A manual voltage adjust potentiometer and a manual-off-auto

switch are provided on the front face of the unit. For use of a user-supplied

external manual adjust potentiometer or for adjust by a motor operated control

(MOC), order MVC-301. The MVC-300 and MVC-301 are designed to operate

with Basler voltage regulators powered from 120 or 240 volt AC sources up to

320 Hz. The adjustable output of the MVC-300 supplies power to 32. 63 or 125

volt fields at 7 amps.

APPLICATION:

The Electronic Manual Voltage Control MVC-300 allows a generator’s output

voltage to be controlled manually by a potentiometer or automatically by a

voltage regulator. It is used as a back-up system for the automatic voltage

regulator. The unit can be mounted on a control panel in ground vehicles,

stationary equipment or shipboard locations.

FEATURES:

• Designed to operate with all Basler voltage regulators rated

at 7 amperes continuous and below

• Completely solid state

• 120-240 Vac operation

• Multiple field output ratings

• Automatic voltage build-up circuit

• Small and light for easy panel or door mounting

• CSA approved/UL recognized

• Available from stock