Beckwith Electric M-2324C Adapter Panel

The M-2324C is an adapter panel which, when combined with the M-2001 Series

Digital Tapchanger Control, provides convenient direct replacement for Pennsylvania

Transformer (McGraw-Edison) Pole Star regulator controls hinged on the right side.

The M-2324C consists of a front door panel with hinge leaves on the right side and

mounts into the control cabinet using the existing two hinges, and knurled knob

which must be saved from the original control.

• Fits directly into existing regulator control cabinet using the existing two hinges

and knurled knob

• Provides built-in CT shorting protection when the M-2001 Series Digital Tapchanger

Control is removed

• Optional SCADA Cutout (Local/ Remote) switch (for use with SCADA enabled M-2001C

controls) allows Local Blocking of SCADA commands

• Optional SCAMP™ (SCADA Controllable Auto/Manual Pushbutton) switch replaces

AUTO/OFF/MANUAL toggle switch

• Optional 2 Level Local Voltage Reduction switch

The M‑2324C is an adapter panel which, when combined with the M‑2001 Series Digital

Tapchanger Control, provides convenient direct replacement for Pennsylvania Transformer

(McGraw‑Edison) Pole Star regulator controls hinged on the right side.

The M‑2324C consists of a front door panel with hinge leaves on the right side and mounts

into the control cabinet using the existing two hinges, and knurled knob which must be

saved from the original control.

Interface

External connections are made via a wiring harness that connects to the terminal block in

the existing control cabinet. Most connections come from a fifteen-position terminal block

on the printed circuit board. An additional terminal block (TB2) provides access to auxiliary

functions, including self‑test alarm, user‑programmable alarm, auto disable and manual

raise/lower.

Features

Separate fuses for test terminal, voltage sensing and motor power are on the front panel.

Spare fuses for each are in the fuse holder.

Binding posts on the front panel allow easy connections for test procedures