GE Fanuc IC670TBM001 Auxiliary terminal block

DESCRIPTION: The IC670TBM001 Auxiliary Terminal Block is a barrier style field control terminal block manufactured by GE Fanuc.

It comes with 9 terminals and accepts 1 or 2 wires with AWG #14 gauge.

About the IC670TBM001

The Field Control IC670TBM001 Auxiliary Terminal Block is an auxiliary terminal block manufactured by GE Fanuc.

It provides additional terminals for analogue and high-density discrete I/O modules.

It also provides additional ground, return, or common connections. It comes with 9 barrier type terminals.

Each terminal accepts 1 or 2 AWG #14 gauge wire with a 2.1 mm2 cross section.

It can also be used to provide additional terminals for the shield during field wiring.

The IC670TBM001 Auxiliary Terminal Block's connection point connection provides enough locations to easily terminate two wires from discrete I/O devices on the control panel.

The IC670TBM001 auxiliary terminal block can be connected to a properly installed DIN rail.

During installation, be sure to install the I/O terminal block first before inserting the auxiliary terminal block into the DIN rail.

The auxiliary terminal mounting lugs are positioned on the right side of the DIN rail.

During field wiring, the chassis ground of any module can be connected to the ground terminal of the auxiliary terminal block.

For 3-wire or 4-wire transmitters, an additional terminal strip with IC670TBM001 auxiliary terminal block must be used.

The module terminals are electrically connected together from the inside. If additional common terminals are required for efficient field wiring.

This optional terminal strip is an optimal solution for field control systems.

It can be connected as an additional device to the side of the I/O terminals in the field control station.