Emerson DeltaV™ M-series I/O Subsystem Horizontal Carriers

• Modular design allows flexible installation

• Allows you to expand online

• Integrated power distribution

Introduction

Get your I/O subsystem up and running efficiently with the

DeltaV™ horizontal mount I/O carriers. The power/controller

carrier contains internal power buses. You don’t need to use

external cabling to connect the system power supply to the

DeltaV controller and the I/O interface carriers.

The power/controller and I/O carriers are modular.

Purchase only what you need but be assured that as your

system grows you can add plug-and-play carriers—Easy!

Benefits

Modular design allows flexible installation. A T- type DIN

rail is all you need to mount the power/controller carrier into

place. The I/O interface carrier plugs on to the power/controller

carrier. Simply plug your I/O terminal blocks into the carrier.

The DeltaV system’s modular design approach allows you to

add I/O carriers as you need them.

Allows you to expand online. Additional 8-wide carriers

may be added online as desired. Carrier extenders give you

the flexibility to install I/O carriers in multiple rows with 1.2.

3 or 4 carriers per row.

Integrated power distribution. Controller and I/O interface

power distribution is integrated into the carriers to reduce and

simplify power and grounding. Carriers also have integrated

shield ground bar to isolate and drain field noise away from

system power.