Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

GE VMIVME-7740 VMEbus Single Board Computers

From:GE | author:Mr.Chen | Time :2024-07-05 | 779 view: | 🔊 Click to read aloud ❚❚ | Share:

Intel® Pentium® III PGA370 socket-based Single Board Computers (SBCs) supporting Windows® 98 Second Edition,

Windows NT®/Windows® 2000. Windows CE, Linux, VxWorks, QNX, Solaris and LynxOS operating systems.

-Special features for embedded applications

-Up to 192 Mbyte IDE CompactFlash (optional)

Three programmable 16-bit timers

32 Kbyte non-volatile SRAM

-Supports remote Ethernet boot

-Software selectable watchdog timer with reset.

-Supports VMEbus P2 connection to hard disk/floppy drive.

-PMC Expansion Site with VMEbus P2 Inputs/Outputs

-VME64 mode support: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32

-VMEbus interrupt handlers, interrupters, and system controllers

Includes byte-swapping hardware for little-end and big-end data.

-Enhanced bus error handling

-Passive heat sink design (no moving parts)

-Standard features include

-PGA370 socket processor

Up to 512 Mbyte SDRAM using a 144-pin SODIMM

-AGP SVGA controller with 4 Mbyte SDRAM

Two on-board Fast Ethernet controllers supporting 10BaseT and 100BaseTX interfaces

-Front panel Universal Serial Bus (USB) connection

-Onboard Ultra-DMA-33 hard disk drive and floppy drive controller with VMEbus P2 input/output

Two high-performance 16550-compatible serial ports

PS/2-style keyboard and mouse ports on front panel

Built-in real-time clock and micro-speaker

Microprocessor

- The VMIVME-7740 brings the Intel Pentium III processor to VMEbus.

The VMIVME-7740 introduces the Intel Pentium III processor to the VMEbus with processor speeds up to 850 MHz. the Pentium III processor has 32-bit addressing and a 64-bit data bus.

Its superscalar architecture allows three instructions per clock cycle. Dynamic branch prediction units, separate instruction and data caches, and MMX™ technology also increase processor performance.

The Pentium III processor also offers a 256 Kbyte Advanced Transfer Cache (on-chip, full-speed L2 cache) with dual independent bus architecture for high bandwidth and performance.

This L2 cache is clocked at the same frequency as the processor, which improves performance.

Memory

- The VMIVME-7740 accepts a 144-pin SDRAM SODIMM with a maximum memory capacity of 512 Mbyte.

The maximum memory capacity is 512 Mbyte. on-board DRAM is dual-ported to the VME bus.

BIOS

- The system and video BIOS is provided by reprogrammable flash memory.

Super VGA Controller

- High Resolution

The VMIVME-7740 supports high-resolution graphics and multimedia-quality video through the Chips & Technology AGP graphics adapter.

The adapter is complemented by 4 Mbyte of internal high-bandwidth 64-bit data interface synchronous DRAM.

The graphics adapter supports screen resolutions up to 1.600 x 1.200 x 64.000 colors (single view mode).

Ethernet Controller - The VMIVME-7740 supports Ethernet LAN through dual Intel 82559 Ethernet controllers.

Supports 10BaseT and 100BaseTX options through two RJ45 connectors. Remote LAN booting is supported.

Remote Ethernet Booting - The VMIVME-7740 utilizes Lanworks Technologies, Inc. BootWare to provide the ability to remotely boot the VMIVME-7740 using NetWare, TCP/IP, or RPL network protocols.

BootWare Features:

- Support for NetWare, TCP/IP, RPL network protocols

- Unrivaled boot sector virus protection

- Detailed boot configuration screens

- Comprehensive diagnostic capabilities

- Option to disable local boot

- Dual boot option allows user to select either network or local boot

Serial Ports - The VMIVME-7740 has two 16550-compatible serial ports on the front panel. The serial channel has a 16-byte FIFO and supports baud rates up to 56 kilobytes per second.

56 kilobytes per second. Two micro-DB9 to standard DB-9 adapters (VMIC P/N 360-010050-001) are required.

Keyboard and Mouse Interface - The VMIVME-7740 is equipped with a PS/2 combo keyboard and mouse interface. A Y adapter cable is included.

Flash Memory - The VMIVME-7740 provides up to 192 Mbytes of IDE CompactFlash flash memory, accessible through the auxiliary IDE port.The VMIVME-7740 BIOS includes an option to allow the board to boot from flash memory.

16-Bit Timers - The VMIVME-7740 provides the user with three 82C54-compatible 16-bit timers (in addition to the system timer). These timers are mapped to I/O space and are fully programmable by software.

  • Basler Electric BE1-25, Sync-Check Relay
  • Basler Electric BE1-50/51 Plug and Play and Retrofit Relays
  • Basler Electric BE1-50/51M, Self-Powered Time Overcurrent Relay
  • Basler Electric BE1-50/51B, Self-Powered Time Overcurrent Relay
  • Basler Electric BE1-11m, Motor Protection System
  • Basler Electric BE1-11t, Transformer Protection System
  • Basler Electric BE1-11d, DC Power Protection System
  • Basler Electric BE1-11i, Intertie Protection System
  • Basler Electric BE1-11g, Generator Protection System
  • Basler Electric BE1-11f, Feeder Protection System
  • Basler Electric BE1-700V, Voltage Only Digital Protective Relay
  • Basler Electric ES-25, Sync-Check Relay
  • Basler Electric ES-27, Undervoltage Relay
  • Basler Electric ES-27/59, Under/Overvoltage Relay
  • Basler Electric ES-32, Reverse Power Relay
  • Basler Electric ES-37, Undercurrent Relay
  • Basler Electric ES-37/51, Under/Overcurrent Relay
  • Basler Electric ES-47, Phase Sequence Relay
  • Basler Electric ES-47N, Phase Balance Relay
  • Basler Electric ES-47N/27, Phase Balance/Undervoltage Relay
  • Basler Electric ES-49, Temperature Relay
  • Basler Electric ES-51, Overcurrent Relay
  • Basler Electric ES-55, Power Factor Relay
  • Basler Electric ES-59, Overvoltage Relay
  • Basler Electric ES-74V, DC Voltage Sensing Relay
  • Basler Electric ES-81O, Overfrequency Relay
  • Basler Electric ES-81O/U, Over/Underfrequency Relay
  • Basler Electric ES-81U, Underfrequency Relay
  • Basler Electric DECS-250-CN1SN1N Digital Excitation Control System
  • Beckhoff EL2622-0010 EtherCAT Terminal, 2-channel relay output
  • Beckhoff EL2622 | EtherCAT Terminal, 2-channel relay output
  • Beckhoff EL2612 | EtherCAT Terminal, 2-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC
  • Beckhoff EL2602-0010 EtherCAT Terminal, 2-channel relay output
  • Beckhoff EL2602 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A
  • Beckhoff EL2596-0010 | EtherCAT Terminal, 1-channel LED output, 0…48 V DC, 3 A
  • Beckhoff EL2596 | EtherCAT Terminal, 1-channel LED output, 0…24 V DC, 3 A
  • Beckhoff EL2595 | EtherCAT Terminal, 1-channel LED output, 2…48 V DC, 0.7 A
  • Beckhoff EL2574 | EtherCAT Terminal, 4-channel LED output, pixel LED
  • Beckhoff EL2564-0010 | EtherCAT Terminal, 4-channel LED output
  • Beckhoff EL2564 | EtherCAT Terminal, 4-channel LED output
  • Beckhoff EL2535-0100 | EtherCAT Terminal, 2-channel PWM output
  • Beckhoff EL2535-0050 | EtherCAT Terminal, 2-channel PWM output
  • Beckhoff EL2535-0005 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 5 A, current-controlled
  • Beckhoff EL2535-0002 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 2 A, current-controlled
  • Beckhoff EL2522 | EtherCAT Terminal, 2-channel pulse train output
  • KEBA KEVIEW V2 341/C-4400 HMI TOUCHSCREEN UNIT
  • KEBA KEMRO K2-200 BL250/A BL 250/A Bus Coupler Module
  • Keba E-CON-14 Operator Interface Panel
  • KEBA CP 255/W Plc Module
  • KEBA CU 212 ZENTRALBAUGRUPPE
  • KEBA CU211/0 25817 Ind 06
  • KEBA RS 091 POWER SUPPLY MODULE
  • KEBA E-SP-CCEC/22180 Panel
  • KEBA E-CPU-186B Control Circuit Board D1633C
  • Keba Kemro K2-200 Control CP 255/X, Part. 072076
  • KEBA analog module, AR281, AR 281
  • KEBA BL250/B Bus link module
  • KEBA Kemro K2-400, DO 470/A, Part No. 054945
  • KEBA HAITAN SA900 Operator Panel
  • KEBA DO 321 module DO 321/B
  • KEBA KeTop C20t-t00-Ar0-KMT Tech Pendant by Karl Mayer
  • KEBA HT401/BENNINGER/5M/55268 TEACH PENDANT HT401BENNINGER/5M/55268
  • KEBA AR 281 ANALOGE INPUT BOARD
  • Engel Keba EC100 PLC Rack with PS244 CU211 PD242 AR181 TT081 DO321 DI325 (19821)
  • KEBA CU 313 Central Unit CU 313/C-SI/63036 Card 128MB
  • KEBA TM-240/A PLC MODULE
  • Keba D1633C E-Cpu-186B Cpu Control Circuit Board W/ D1630D
  • Keba Engel E-CON-CC100/A/22178 HMI Operator Control Display Panel
  • KEBA K2-200 CP 242/B controller module
  • KEBA KEVIEW V2 341/C-4400 HMI TOUCHSCREEN UNIT 84494 24 VDC
  • KEBA E-8-THERMO 1770B-1 Thermocouple circuit board
  • KEBA 3HAC12929-1 TEACH PENDANT
  • Keba KETOP C50 R/73810/06 KEBA PANEL OPERATOR DISPLAY
  • KEBA Kemro K2-400 DO 470/B 059707 Module
  • LENZE c300 controller
  • LENZE p500 controller
  • LENZE p300 controller
  • LENZE v200-P monitor
  • LENZE v200-C monitor
  • LENZE v800-P industrial PC
  • LENZE v800-C industrial PC
  • LENZE EtherCAT-CAN gateway x750
  • LENZE V450 Web Panel
  • LENZE v430 web panel
  • Beckhoff EL2521-0024 | EtherCAT Terminal, 1-channel pulse train output
  • Beckhoff EL2521 | EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, RS422, 50 mA
  • Beckhoff EL2502-0010 | EtherCAT Terminal, 2-channel PWM output
  • Beckhoff EL2502 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 0.5 A
  • DEIF MVR-T216 Transformer Differential Protection
  • DEIF MVR-T215 Transformer Protection
  • DEIF MVR-M257 Motor Protection
  • DEIF MVR-M255 Motor Protection
  • DEIF MVR-M215 Motor Protection
  • DEIF MVR-M210 Motor Protection
  • DEIF MVR-G257 Generator Differential Protection
  • DEIF MVR-G215 Generator Protection
  • DEIF MVR-F255 Directional Feeder Protection
  • DEIF MVR-F201 Basic Feeder Protectio
  • DEIF LMR-122D Loss of mains relay
  • DEIF LMR-111D Loss of mains relay
  • DEIF APU-4 Advanced G59 and G99 protection unit
  • SAACKE FSC-01V3.02/V3.00 Industrial Combustion Controller
  • GE Multilin 750-P5-G5-S5-HI-A20-G 750 Management Relay
  • GE Multilin 750-P5-G5-D5-HI-A20-R 750/760 Feeder Mgmt Relay Series
  • GE Multilin 750-P5-G5-D5-HI-A20-G Management Relay
  • GE Multilin 750-P5-G1-D5-HI-A20-R Multilin 1A Zero Sequence Current Inputs
  • GE Multilin 750-P1-G1-S1-HI-A20-R-T-H Feeder Management Relays
  • GE Multilin 750-P1-G1-S1-HI-A20-R Feeder Management Relays
  • GE Multilin 750-P1-G1-D1-HI-A20-R Base Unit 750 Relay
  • GE Multilin 239-RTD-AN-H motor protection relay
  • GE Multilin 489-P5-HI-A20-T-H Generator Management Relay for 489 Series
  • GE Multilin 489-P5-HI-A20-T Generator Management Relay for 489 Series
  • GE Multilin 489-P5-HI-A20-E-H Relay Motor Management
  • GE Multilin 489-P1-LO-A20 489 Motor Management Relay Base Unit
  • GE Multilin SR469-P5-LO-A20-T Motor Management Relay
  • GE Relay from GE Grid Solutions SR469-P5-LO-A20-E
  • GE Multilin SR469-P5-LO-A20 Motor Management Relay with Case
  • GE Multilin SR469-P5-HI-A20-T 469 Series Relay
  • GE Multilin SR469-P1-HI-A1-E-H 469 Series Relay
  • GE Multilin SR469-P1-H1-A1-E 469 Series Relay
  • GE Multilin 469-P5-LO-A20-T Phase Current Input 5 A Phase CT Secondaries
  • GE Multilin 469-P5-LO-A20-E LO Control Power with 4-20mA Analog Outputs
  • GE Multilin 469-P5-LO-A20 Motor Management Relay
  • GE Multilin 469-P5-HI-A20-E-H Motor Management Relay
  • GE Multilin 469-P5-HI-A20 469 Motor Management Relay
  • GE Multilin 469-P1-HI-A1-E-H 469 Base Unit Motor Management Relay
  • GE Multilin 469-P1-H1-A1-E 469 Motor Mgmt Relay
  • Beckhoff ED2504 | EtherCAT Terminal, 4-channel PWM output