Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

GE VMIVME-7740 VMEbus Single Board Computers

From:GE | author:Mr.Chen | Time :2024-07-05 | 367 view: | Share:

Intel® Pentium® III PGA370 socket-based Single Board Computers (SBCs) supporting Windows® 98 Second Edition,

Windows NT®/Windows® 2000. Windows CE, Linux, VxWorks, QNX, Solaris and LynxOS operating systems.

-Special features for embedded applications

-Up to 192 Mbyte IDE CompactFlash (optional)

Three programmable 16-bit timers

32 Kbyte non-volatile SRAM

-Supports remote Ethernet boot

-Software selectable watchdog timer with reset.

-Supports VMEbus P2 connection to hard disk/floppy drive.

-PMC Expansion Site with VMEbus P2 Inputs/Outputs

-VME64 mode support: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32

-VMEbus interrupt handlers, interrupters, and system controllers

Includes byte-swapping hardware for little-end and big-end data.

-Enhanced bus error handling

-Passive heat sink design (no moving parts)

-Standard features include

-PGA370 socket processor

Up to 512 Mbyte SDRAM using a 144-pin SODIMM

-AGP SVGA controller with 4 Mbyte SDRAM

Two on-board Fast Ethernet controllers supporting 10BaseT and 100BaseTX interfaces

-Front panel Universal Serial Bus (USB) connection

-Onboard Ultra-DMA-33 hard disk drive and floppy drive controller with VMEbus P2 input/output

Two high-performance 16550-compatible serial ports

PS/2-style keyboard and mouse ports on front panel

Built-in real-time clock and micro-speaker

Microprocessor

- The VMIVME-7740 brings the Intel Pentium III processor to VMEbus.

The VMIVME-7740 introduces the Intel Pentium III processor to the VMEbus with processor speeds up to 850 MHz. the Pentium III processor has 32-bit addressing and a 64-bit data bus.

Its superscalar architecture allows three instructions per clock cycle. Dynamic branch prediction units, separate instruction and data caches, and MMX™ technology also increase processor performance.

The Pentium III processor also offers a 256 Kbyte Advanced Transfer Cache (on-chip, full-speed L2 cache) with dual independent bus architecture for high bandwidth and performance.

This L2 cache is clocked at the same frequency as the processor, which improves performance.

Memory

- The VMIVME-7740 accepts a 144-pin SDRAM SODIMM with a maximum memory capacity of 512 Mbyte.

The maximum memory capacity is 512 Mbyte. on-board DRAM is dual-ported to the VME bus.

BIOS

- The system and video BIOS is provided by reprogrammable flash memory.

Super VGA Controller

- High Resolution

The VMIVME-7740 supports high-resolution graphics and multimedia-quality video through the Chips & Technology AGP graphics adapter.

The adapter is complemented by 4 Mbyte of internal high-bandwidth 64-bit data interface synchronous DRAM.

The graphics adapter supports screen resolutions up to 1.600 x 1.200 x 64.000 colors (single view mode).

Ethernet Controller - The VMIVME-7740 supports Ethernet LAN through dual Intel 82559 Ethernet controllers.

Supports 10BaseT and 100BaseTX options through two RJ45 connectors. Remote LAN booting is supported.

Remote Ethernet Booting - The VMIVME-7740 utilizes Lanworks Technologies, Inc. BootWare to provide the ability to remotely boot the VMIVME-7740 using NetWare, TCP/IP, or RPL network protocols.

BootWare Features:

- Support for NetWare, TCP/IP, RPL network protocols

- Unrivaled boot sector virus protection

- Detailed boot configuration screens

- Comprehensive diagnostic capabilities

- Option to disable local boot

- Dual boot option allows user to select either network or local boot

Serial Ports - The VMIVME-7740 has two 16550-compatible serial ports on the front panel. The serial channel has a 16-byte FIFO and supports baud rates up to 56 kilobytes per second.

56 kilobytes per second. Two micro-DB9 to standard DB-9 adapters (VMIC P/N 360-010050-001) are required.

Keyboard and Mouse Interface - The VMIVME-7740 is equipped with a PS/2 combo keyboard and mouse interface. A Y adapter cable is included.

Flash Memory - The VMIVME-7740 provides up to 192 Mbytes of IDE CompactFlash flash memory, accessible through the auxiliary IDE port.The VMIVME-7740 BIOS includes an option to allow the board to boot from flash memory.

16-Bit Timers - The VMIVME-7740 provides the user with three 82C54-compatible 16-bit timers (in addition to the system timer). These timers are mapped to I/O space and are fully programmable by software.

  • Alstom 029.232 446 Central Unit VME A32/D32 | COP 232.2
  • ABB REF610B11LCNP Feeder Protection and Control
  • A-B 1794-IN106 Input/Output Analog Modules
  • General Electric 029.381208 Converteam Controller Module
  • Eaton XIOC-BP-3 Moeller 3-Signal Module Backplane
  • ETON XVS-460-57MPI-1-1E Industrial-grade Embedded Touch Screen
  • EATON XVS-430-57MPI-1-10 Touch Panel
  • EATON XV-430-12TSB-1-10 Touch Panel
  • EATON XV-440-12TSB-1-10 Touch Panel
  • Eaton MP-3010 66D2205G01 Motor Protection Relay
  • Eaton CS-TX3-3.81X2.54-64TW Terminal Block
  • XIOC-BP-XC1 | Eaton XC modular programmable logic controller
  • EATON XVS-430-10MPI-1-10 Touch Panel
  • Eaton 8922-RB-IS Isolated Signal Isolator
  • Eaton XV-442-57CQB-1-10 Touch Panel
  • Eaton DPM-MC2 Communication Module
  • Eaton MPB2-TP Communication module
  • DEIF DM-4 hydro Delomatic 4 hydro
  • DEIF DU-2/MKIII | DEIF Multi-instrument
  • DEIF PCM4.3 DEIF PCM4.3 Power Control Module
  • DEIF DM-4 marine Integrated systems
  • DEIF TAS-331DG AC transducer for active or reactive power
  • DEIF TAC-311DG Single-function transducer
  • DEIF IOM4.2 DEIF IOM4.2 Input/Output Module
  • DEIF PSM-1 Power System Management Module
  • DEIF D45, E45 & B45 Meters for DIN rail mounting
  • DEIF DPS-1 DC Power Supply
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF DPR Edgewise moving coil
  • DEIF DM 400 gas Integrated systems
  • DEIF DCP2 (24V) DC power supply
  • DEIF DIM-Q Insulation monitor
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF OPM-1 DELOMATIC-MULTI-FUNCTION SYSTEM
  • DEIF SCM4.1 DEIF SCM4.1 Control Module
  • DEIF DELOMATIC-3 DGU2 Control Module
  • DEIF LSU-112DG Load sharing, paralleling & operation
  • DEIF DLQA series Illuminated 360° azimuth indicators
  • DEIF DLQ series Illuminated marine bridge instrument
  • DEIF DCF-Q96 DC integrator, pulse transmitter
  • DEIF CSQ-2 Check synchronising relay
  • DEIF LSU-113DG Load sharing, paralleling & operation
  • Deif IPM-1 Delomatic Input Module
  • DEIF PCM4.4 Differential Current Relay
  • DEIF CM-2 Deif Cm-2 Control Module
  • DEIF DM-4 gas Delomatic 4 gas
  • DEIF DM-3 Multi-function system
  • DEIF DLQW series Watertight marine instruments with Illumination
  • DEIF CSQ-3 Multi-function synchroscope
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF PPU 3 paralleling & protection unit (PPU)
  • DEIF RMV-112D Voltage Relay
  • DEIF GPU 2 GS Multi-line 2/version
  • DEIF SCM-1 Smart Communication Module
  • Studer Communicator A8600 Controller
  • Bently 3500/42M 140734-99 Proximitor Seismic Monitor
  • Bently 3701/55 289761-01 ADAPT (ESD) Emergency Shutdown Device
  • Bently 3701/55 323174-01 ADAPT (ESD) Emergency Shutdown Device
  • Bently 3500/15 114M5330-01 AC and DCPower Supplies
  • Bently 3500/42M 140734-02 Proximitor Seismic Monitor
  • Bently 1900/65A 172323-01 Vibration Monitoring Controller
  • Bently 1900/65-00-01-03-01-01 General Purpose Equipment Monitor
  • Bently 3500/93 135785-02C Backlit Display Unit
  • Bently 1900/65A-01-01-03-00-01 General Purpose Equipment Monitor
  • Bently 3500/54-03-00 Dual channel overspeed detection module
  • Bently 1900/65A-00-01-01-01-01 General Purpose Equipment Monitor
  • Bently 3300/16-11-01-03-00-00-01 XY/Gap Dual Vibration Monitor
  • Bently 3300/20-12-01-03-00-00 Proximitor Monitor
  • Bently 330103-00-03-05-02-05 Proximity Transducer System
  • Bently 330703-000-070-10-02-05 3300 XL 11 mm Proximity Transducer System
  • Bently 330104-00-05-10-02-CN 8 mm Proximity Probes
  • Bently 22810-01-05-50-02 Velomitor Piezoelectric Speed Sensor
  • Bently 330876-03-50-00-00 Proximity Probe / Armored High-Temperature FluidLoc Cable
  • Bently 330130-085-00-00 3300 XL 8 mm Proximity Transducer System
  • Bently 330901-05-32-05-02-00 Proximity Transducer System
  • Bently 330108-91-05 Vibration Monitoring Sensor
  • Bently 84152-01 Shielded Sensor Cable Assembly
  • Bently 330104-00-05-10-02-00 Proximity Transducer System
  • Bently 163179-02 2024 temperature module
  • Bently 330180-X1-CN 3300 XL 8 mm Proximity Transducer System
  • Bently 128277-01 Vibration Monitoring Module
  • Bently 1-536067-4 TE Connectivity AMP Connectors
  • Bently 1X35668 Vibration extension cable
  • Bently 330130-045-00-00 Standard Extension Cable
  • Bently 330980-51-00 3300 XL NSv Proximitor Sensor
  • Bently 9200-01-01-10-00 Seismoprobe Velocity Transducers
  • Bently 149986-01E 16-Channel Relay Module
  • Bently 3500/45 176449-04 Position Monitor
  • Bently 3500/53 133388-01 Overspeed Detection Module
  • Vibro-meter VM600-ABE042 204-042-100-011 Precision Control Module
  • Vibro-meter vmf-MPC4 200-510-111-034 200-510-070-113 Module
  • Vibro-Meter VM600 204-040-100-012 measurement module
  • VIBRO-METER VM600-CSA 204-040-100-211 PLC module
  • Vibro-meter 200-560-000-018 200-560-101-015 VM600 IOC4T Module
  • Vibro-meter VM600-ABE040 204-040-100-011 system racks
  • Vibro-meter VM600 RPS6U rack power supply
  • Vibro-meter VM600-RPS6U 200-582-200-011 cutting-edge monitoring module
  • Vibro-meter VM600 RLC16 relay card
  • Vibro-meter VM600 CMC16 Condition Monitoring Card
  • Vibro-meter 200-582-915-032 VM600 power supplies Module
  • Watlow PPC-TB50 Process/Temperature Controller
  • Watlow PPC-TB50 30280-00 terminal board
  • Watlow F4T | Integrated Process Controller
  • Watlow SERIES F4 Ramping Controller
  • Watlow CLS208 C10000CP Multi-zone Temperature Controller
  • Watlow CLS216‌ CLS200 series temperature controller
  • Watlow PPC-TB50 30280-00 CLS208 208-1200000 terminal board
  • WATLOW CAS 16CLS/CAS temperature controller
  • WATLOW CAS200 CLS216 Temperature Controller
  • 1SVR011732R1300 ABB - Converter: temperature
  • 1SVR011712R1700 ABB Control - Datasheet PDF & Technical Specs
  • ALSTOM NRD108033 8RDC44667G01 SA44667.C Interface Module
  • ALSTOM VOOB8-B 12004-106-04 VER:V1.0.0 8-channel digital output module
  • ALSTOM MFAC34N1AA0001A Auxiliary Speed Relay
  • ALSTOM I/OBE2 12004-104-00 V1.0.0 Safety I/O Module
  • ALSTOM POS1846 TRVC062333000 CP00000310 Vehicle control module
  • ALSTOM 42011-106-00 A01 ITC_VIOM_VIOC VER.A01 Industrial Control Module
  • ALSTOM NRD108028 8RDB43655 SA43655.E Interface Module
  • ALSTOM I/OBUS2 12004-103-01 VER:V1.2.0 Bus Interface Module
  • ALSTOM MCHN02D1AB0005A Controller
  • ALSTOM VIIB16-C 12011-105-00 V1.0.0 Digital Interface Module
  • ALSTOM N897092520B N897092057Y TRENO N897092500E Control System Module
  • ALSTOM CMP1838 TRVCO62345000 process control module
  • ALSTOM PIB101C Industrial-Grade PCB Module
  • ALSTHOM MCGG22D1CB0753C Controller
  • ALSTOM STO1726KO1 Safety Torque Off (STO) module
  • ALSTOM CMU 42015-115-00 Amplifier controller
  • ALSTOM 730475-D ELEMENTS-F2 Control Pulse Card