FOXBORO 130M Series Pnuematic Controller

The 130M Series Pnuematic controllers offer manual setpoint adjustment and are the standard controller in the Foxboro® 130 Series.

All Foxboro® 130 Series controllers are designed for high-density control room installations.

These devices are ideally suited for applications where precise control is critical to skilled process management.

The 130M Series is essentially the same as the 130P and 130F Series with the exception of the following features:

130P Series: Has setpoints that are pneumatically modified by remote signals.

130F Series: Remote/local switching to support manual or pneumatic modification of setpoints.

Designed for high-density control room installations, these controllers are suitable

for any situation where precise control is required for efficient process management.

The basic controller is the 130M series with manual setpoint adjustment.

130P series is similar to the 130M, but the setpoint can be adjusted pneumatically via a remote signal.

The 130F series is similar to the 130M but includes a remote/local switch for manual or pneumatic setpoint adjustment.

Large Eye-Catching Display

The visibility and legibility of the large, brightly colored pointer located directly behind

the clear vertical scale has become the benchmark against which other display concepts are judged.

The system provides a continuous full-scale display of all variables,

an effective indication of controller deviations, and easy scale changes without tools.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

CA5-10 1-Pole Front Auxiliary Contact Block with Screw Terminals

IC660TBD025 GeniusI/O Terminal Assembly Module

1769-OF2 Analog Output Module

1769-PB4 Power Supply Module

80190-780-01-R HMI Interface Board Printed Circuit Boards

BSFC-01C Charge Control Board SP Kit Gate Driver Boards

MPL-B580F-MJ72AA Servo Motor

SK-G9-GDB1-D292 Medium and High Voltage Inverter Heat Sink Fan Main Board

DS200LDCCH1AGA Drive Control/LAN Communication Board

CA5-01 Auxiliary Contacts Front Mounting Block Screw Clip