GE Fanuc IC698CHS109 Racks I/O Racks for Rx7i PACsystems

Description: The GE Fanuc IC698CHS109 rack is an I/O rack for the Rx7i PACsystem.

This 8-slot I/O rack is software configurable and supports all Rx7i CPU and I/O configurations for VME64 backplane systems,

90-70 series I/O devices and VME modules.

The GE Fanuc IC698CHS109 Rx7i Rack is a front-mounted I/O rack designed for the Rx7i PACsystem family.

The Rx7i PACsystem chassis uses the VME64 base system, which is four times faster than existing VME systems, providing faster I/O throughput.

It supports RX9i CPUs and VME modules (including 90-70 series I/O) as well as VMIC modules.

The IC698CHS109 Rack features automatic daisy-chained interrupt profiles and Bus Grant (BG) signals, eliminating the need for slot jumpers.

The IC698CHS109 Rack also features a backplane connector (J2 connector) that provides high-speed VME data transfer of up to 64 bits per cycle.

It also accepts plug-in Rx7i power supplies. The rack's I/O addressing is software configurable through the Machine Edition Logic Developer-PLC software.

No DIP switches or jumpers are required on the connected I/O modules.

The GE Fanuc IC698CHS109 rack requires 350 watts of power to operate. It is rated for 60 watts of current at 5 volts DC and 12 volts DC, respectively.

The IC698CHS109 chassis has nine I/O slots (labelled 1 through 9) for mounting CPUs, I/O modules, and other devices.

The IC698CHS109 chassis has nine I/O slots (labelled 1 through 9) for the CPU, I/O modules, and power supply modules.

I/O slots 1 through 8 all have a slot width of 20.3 mm, slot 9 has a slot width of 40.5 mm, and the power supply module slot (also referred to as slot 0) has a slot width of 61 mm.

The I/O modules in the IC698CHS109 chassis can be arranged in a configuration of seven single-wide modules, four double-wide modules, or a mix of single and double-wide modules.

The IC698CHS109 chassis supports IP 54 or higher rated mounting enclosures with an operating temperature range of 0 to 60 degrees Celsius.