GE Fanuc IC695CHS007 PACSystem RX3i Universal Backplane

The IC695CHS007 is a general purpose backplane that is part of the PACSystem RX3i platform, currently part of Emerson Automation and formerly manufactured by GE Intelligent Platforms (GE IP). The backplane has one (1) slot for the IC695 power supply (slot 0) and PCI/serial based IO slots (slots 1-5) and PCI only slot (slot 6). The backplane supports IC695. IC694. and IC693 I/O and option modules or RX3i and 90-30 series modules. The modules are equipped with isolated 24 VDC terminal blocks, grounding points, and internal ground strips.IC695CHS007 is a general purpose backplane for the PACSystem RX3i family of programmable automation controllers (PACs). This backplane is a seven (7) slot backplane reserved for power and I/O modules. It natively supports any IO and option modules of the PACsystem RX3i series as well as the 90-30 series I/O and option modules.

IC695CHS007 Slot 0 is reserved for the IC695 power supply. Slots 1-5 are dual connector slots that support Peripheral Component Interconnect (PCI)-type connectors used by PACSystem components, such as the IC695 module, and serial connectors used by the 90-30 series of modules, specifically the IC693 and IC694 modules. Slot 6. the rightmost and last slot, is PCI-only and is compatible with RX3i modules only.

The IC695CHS007 is ideal for applications with limited mounting space or for the implementation of remote I/O architectures. The module comes with a 24 VDC terminal strip located at the left end of the rack. Backplane grounding points and an integrated ground strip are provided for connecting the shielding and grounding connections of the rack-hosted module. The slot number is also clearly printed on this rack so that the module can be installed accordingly.

There are two (2) versions of this IC695CHS007. specifically the initial version, IC695CHS007-AA, and the subsequent version, IC695CHS007-BA, which include mechanical enhancements, specifically the chassis' backplane PCI connectors.

This IC695CHS007 is for horizontal casting only. Other mounting orientations may affect airflow and ultimately system performance. This rack mounts directly to the chassis panel through the mounting holes provided in the chassis.

The GE IC695CHS007 backplane is a general-purpose backplane that is part of the RX3i PACSystems family designed and manufactured by GE Fanuc as a replacement for the 90-30 series systems.The IC695CHS007 backplane has an input voltage of +24 V. Users should be aware that the recommended method of mounting the IC695CHS007 backplane should include both horizontal casting and mounting to an enclosure that is rated at a minimum of IP The IC695CHS007 general purpose backplane has a grounding point with the terminal strip located at the left end. In addition, the backplane includes an integrated ground strip and visible slot numbers for configuration and support for other manufacturers' systems and option modules.

The IC695CHS007 backplane has an internal current of 5 milliamps at 240 volts DC and 3 milliamps at 600.3 volts DC and has seven slots available for components. Supported components can include PCI I/O components such as IC693.Compatible PCI components begin with product code IC695.GE backplanes, like the IC695CHS007 backplanes, can be used in hazardous areas, but in these environments they require enclosures with a higher level of protection. The minimum protection rating for hazardous locations is IP 54.The IC695CHS007 backplate does not require much mounting space, but a minimum of 4 inches of space on all sides is required for proper cooling. The unit's specified dimensions are 141.4 x 264.9 x 147.3 mm (5.5 x 10.4 x 5.8 inches).

IC695CHS007 Frequently Asked Questions

1. How many slots does the IC695CHS007 have?

The IC695CHS007 has seven (7) module mounting slots.

2. Does the IC695CHS007 support 90-30 series I/O modules?

Yes, the 90-30 series I/O and option modules are supported by the IC695CHS007 backplane.

3. What is the current rating of the IC695CHS007?

The current rating of the backplane is 3 mA at 600.3 VDC and 5 mA at 240 VDC.

3. What are the supported mounting orientations for the IC695CHS007?

This IC695CHS007 is designed for horizontal mounting only. Other mounting orientations are not guaranteed to provide optimum system performance.

Technical Description of IC695CHS007

The IC695CHS007 is a PACSystem RX3i general purpose backplane, formerly manufactured by GE Intelligent Platforms (GE IP) and now part of Emerson Automation. This backplane has seven (7) slots to support the installation of PCI-based RX3i and 90-30 series I/O and option modules. It has a dual bus backplane and supports horizontal mounting orientation only. The backplane has isolated 24VDC inputs rated at 3 mA at 600.3 VDC and 5 mA at 240 VDC.