GE Fanuc IC695CEP001 CEP Carrier Assembly

The IC695CEP001 CEP carrier assembly is manufactured by GE Fanuc and has a voltage range of 19.2 to 30 volts DC.

The power rating is 0.22 watts (24 amps) at 5.25 volts DC.

This PROFINET CEP bracket has two Ethernet RJ-45 ports and a Micro-B USB port for firmware.

The IC695CEP001 module is a GE Fanuc CEP carrier module used in GE RX3i systems.

The CEP carrier module is designed for PROFINET communications and has a copper RJ-45 Ethernet port.

The module has 2 Ethernet port connectors with 10/100 Base-TX sockets.

The CEP bracket is a powerful system component with standard functions.

The CEP tray is a powerful system component with standard features such as complete programming and configuration options via Proficy Machine Edition software, and support for multiple network topologies.

USB port for all necessary firmware upgrades, improved troubleshooting and advanced remote node module scanning.

The IC695CEP001 CEP carrier operates over a voltage range of 19.2 to 30 volts DC.

It produces 25.0 watts (22.24 amps) of power at a nominal voltage of 5 volts DC.

The system allows one I/O module per station, for a total of 1024 bytes of I/O data per station.

In addition, the GE Fanuc IC695CEP001 carrier module allows up to 512 bytes of I/O data per station for input and output data.

The module supports PROFINET version 2.3 (Class A) and requires Proficy Machine Edition version 8.0 SIM 5 or higher.

The CEP carrier also has 32 input status bits and 32 output control bits.

The IC695CEP001 CEP carrier module is part of a high-speed running I/O LAN system.

The physical characteristics of the IC695CEP001 carrier module include the following dimensions: 177.2 x 51 x 35 mm (7 x 2 x 1.3 inches).

The component operates over a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).