GE Fanuc IC695CBL002 CPU Cable Replacement Cable

The IC695CBL002 cable is a replacement cable used to connect the CPU unit to the energy pack of GE Fanuc's RX3i PACSystem.

The cable comes with a 7-pin keyed connector and is 1 metre (36 inches) long. The system operates on 120/240 volts DC,

125 Vdc or 24 Vdc, and compatible energy packs can be mounted on DIN rail.

The GE Fanuc IC695CBL002 cable is a replacement cable used to connect the RX3i PACSystems Series CPU to the optional energy pack.

The cable is made of the best materials for typical industrial use and is coated to provide the necessary protection for use in harsh environments.

The IC695CBL002 cable connects to the connectors located at the bottom of the CPU and energy pack.

These components are manufactured in accordance with the EU RoHS Directive 2011/65/EU and they are powered by a voltage range of 120/240 volts DC,

125 Vdc or 24 Vdc. The IC695CBL002 cable has a 7-pin keyed connector and is 1 metre (36 inches) long.

Custom lengths are available for GE accessory cables like this one, but 1 metre is the standard length for this type of application.

The PACSystems RX002i Energy Pack, compatible with the IC3CBL695 cable, can be mounted on a DIN rail like the EN50022 rail.

but can also be mounted on a panel where other equipment is placed. The catalogue number of the compatible Energy Pack module is IC695ACC402.

The supported CPU is the GE IC695CPE330 CPU.The primary purpose of the IC695CBL002 CPU cable is to connect the CPU to the Energy Pack.

In the event of a system power failure, the energy pack provides additional backplane power. the CPU can automatically switch to the energy pack to keep the system running.

The power pack will maintain power long enough for the CPU to save valuable data or user memory.

The contents of the CPU are then saved to the system's non-volatile memory.