GE IC694CEE001 Single Slot RX3i Carrier/Expansion Module

Product Description

The IC694CEE001 is a single-slot RX3i carrier/expansion module from GE.

It features an integrated PROFINET network interface and redundant 24 VDC power inputs.

The IC694CEE001 uses existing state-of-the-art RX3i or 90-30 series I/O for superior availability.

Optimal uptime and extreme flexibility reduce operating costs.

The IC694CEE001 protects critical applications where any single point of failure affecting more than one I/O module is unacceptable.

The RX3i IO is designed for mission-critical discrete and process applications.

With advanced diagnostics and outstanding flexibility, this rack-based IO offers a wide range of standard and advanced IOs.

The IC694CEE001 carrier connects a remote node consisting of an RX3i I/O module to a PROFINET I/O local area network (LAN).

and connects it to the RX3i CEP001 carrier. This allows you to add another RX3i IC694 I/O module to the remote node.

The main remote I/O functions of the IC694CEE001 carrier include: scanning of all modules within the remote node (input and output scanning).

Publishing data to PROFINET IO controllers on the PROFINET network during a user-specified production cycle.

Receiving data from PROFINET IO controllers on the PROFINET network according to the production timeframe defined by the customer; and

Monitoring PROFINET communication and module configuration between PROFINET I/O controllers and modules in remote nodes.

Manage the status of the I/O in the event of a communication outage; and issue fault messages (such as alarms and diagnostics), alarms and diagnostics) to the controller.

NOTE: The USB port is for firmware upgrades only and should not be used for permanent connections. The CEP Carrier requires a user-supplied +24 VDC power supply.

Functions

Scans all modules within a remote node (input and output scanning)

Publish data to the PROFINE IO controller on the PROFINET network during a user-specified production cycle

Receives data from PROFINET IO controllers on the PROFINET network during a user-specified production cycle

Manage PROFINET communications and module configuration between PROFINET IO controllers and modules within remote nodes.

Manage the status of I/O in the event of a communication outage

Publishing fault messages (alarms, diagnostics, etc.) to PROFINET IO controllers

Comprehensive programming and configuration services for all supported RX3i IO modules using Proficy Machine Edition

Supports daisy-chained/linear, star or ring (redundant media) network topologies

Two switched Ethernet ports: two eight-core RJ-45 shielded twisted-pair 10/100 Mbps copper interfaces

One USB port for field updating firmware using WinLoader

Related Product Recommendations:

FBM203 P0914SV Channel Isolated 8-Input RTD

FBM204 P0914SYI/O Module 4 Channel

369-C101 Motor Management Relay

DeltaVrm VerticalPlus Input/Output Subsystem carrier

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200FCGDH1B GATE ASSIGNMENT AND STATUS CARD (FCGD)

8115-DO-DC 8-Channel Digital Output Module

RS-FS-9001 362A1052P404 Flame Sensor/Detector

369-LO-0-M-F-E-0-0 Motor Management Relay