GE IC670CHS103 Chassis I/O Chassis Unit

The Field Control IC670CHS103 base is an I/O base unit for use with other field control units manufactured by GE Fanuc.

The I/O terminal boards that can be mounted on this base include terminals for fencing, which supports secure mounting of the module to avoid generating erroneous data.

The IC670CHS103 base unit allows modules to be inserted and removed with the power on without affecting other equipment installed on the I/O station.

In other words, there is no need to switch off the power supply when replacing modules on the terminal block.The IC670CHS103 Basic Unit is compatible with the Field Control Units of the IC670. IC670CH and IC670CHS series.

The IC670CHS103 I/O base unit provides a variety of keying locations for module mounting and includes a kit with all necessary keys and tools.

The I/O terminal block has keyways and key clips to help make module installation easy.The IC670CHS103 base unit supports installation in Class I, Division 2. Group A/B/C/D environments, which are generally non-hazardous environments.

These environments are generally non-hazardous. The unit can also be used in hazardous areas, but the unit must be shut down before performing any operations such as removing or replacing host modules.

The IC670CHS103 device operates on 115 VAC or 125 VDC, with an input frequency of 47 to 63 Hz.

Depending on the type of power supply used, the unit draws 48 VA or 24 watts. The base unit has a peak inrush current of 20 amps and requires a hold time of up to 20 milliseconds.