GE IC200MDL643 Discrete Input Module

Product Description The IC200MDL643 Discrete Input Module is a 5/12 Vdc Versamax positive/negative logic input module from GE Fanuc.

It has 2 sets of 16 inputs with 0 to 15 volts DC and an input impedance of 2.4 kilohms.

The IC200MDL643 Discrete Input Module is a GE Fanuc Versamax 24 Vdc rated positive/negative logic input module with 16 inputs in 2 groups.

The inputs support both positive and negative logic. Positive logic inputs send current to the common and negative logic inputs do the opposite, receiving current from the common.

Inputs with negative logic configurations are compatible with TTL devices. The backplane provides all power for module operation.

The IC200MDL643 discrete input module provides 16-bit discrete input data. The device has a typical input impedance of 2.4K ohms at 12 volts DC.

The IC200MDL643 discrete input module has a minimum on-state current of 1.45 mA and a minimum off-state current of 0 to 0.7 mA.

On and off response times are up to 0.25 ms. It also provides three configurable input filtering times to compensate for the 0.25 ms, 0.5 ms, and 0.5 ms on/off response times.

It also provides three configurable input filtering times to compensate for noise spikes and switching jumps of 0.25 ms, 1.25 ms, and 7.25 ms. Two input groups have a common connection point.

One group can be wired for positive or negative logic. If the system requires additional bus terminals.

A shorting bar with 2 amps of current-carrying capability is also available for use with the B-terminal.

The IC200MDL643 discrete input module has an input voltage of 0 to 15 volts DC and a user input current of 1.8 milliamps at 5 volts DC and 4 milliamps at 12 volts DC.

The user input current is 1.8 mA at 5 volts DC and 4.9 mA at 12 volts DC. It has no thermal derating and no external power supply.

During installation, make sure that hot plugging and unplugging is done correctly to avoid backplane interruptions.