GE Fanuc IC200CPUE05 CPU Controller Module

From:GE | author:Mr.Chen | Time :2024-07-17 | 193 view: | Share:

The GE Fanuc IC200CPUE05 is a VersaMAx controller module. The controller has a versatile design with 64 KB of configurable user memory.

It has one (1) RS232. one (1) RS485. and one (1) Ethernet communication port embedded.

The controller has a Boolean execution speed of 0.8 ms/K (typical) and supports up to 64 modules or 2048 I/O points.

About the IC200CPUE05

The GE Fanuc Versamax IC200CPUE05 CPU module is equipped with a supercapacitor capable of powering the memory for up to an hour.

There are run/stop switches in the module to control operations. the CPU is capable of handling floating-point data functions.

The CPU module is equipped with two sets of LEDs in the upper and lower right corners, with PWR, OK, RUN, FAULT, FORCE, PORT 1 and PORT 2 LEDs.

It has PWR, OK, RUN, FAULT, FORCE, PORT 1 and PORT 2 LEDs that light up when power is applied to the module and send different update messages to the user.

The IC200CPUE05 CPU module can be programmed using the ladder diagram and instruction list programming languages.

The CPU has an EGD time synchronisation function and supports up to 8 SRTP server connections.

The IC200CPUE05 is a central processing unit (CPU) module that is part of the VersaMax programmable logic controller (PLC) product family.

This CPU, also known as a controller, is used to execute downloaded logic into the CPU's memory.

This CPU has a compact form factor, supports horizontal or vertical mounting to DIN rails, and is highly scalable.

The IC200CPUE05 has 64 KB of user-configurable memory and can handle up to 64 modules or up to 2048 I/O points.

It embeds one (1) 232-pin D connector supporting the RS9 standard, one (1) 485-pin D connector supporting the RS15 standard, and one (1) 485-pin D connector supporting the RS15 standard.

It embeds one (1) RS9-compliant 232-pin D connector, one (1) RS15-compliant 485-pin D connector, and one (1) Ethernet communication port that supports 10Mbps transfer rate, full and half duplex.

capable of up to eight (8) SRTP connections and thirty-two (32) configuration-based Ethernet Global Data (EGD) exchanges.

The IC200CPUE05 supports floating-point data formats and has a typical Boolean execution speed of 0.8ms/K. It also has a built-in supercapacitor.

It also features a built-in supercapacitor that provides up to 1 hour of data retention before transferring backup protection to a battery capable of up to 6 months.

When not in use, the installed battery has a shelf life of up to 5 years.

The IC200CPUE05 is available in several revisions. These revisions include CPUE05-BE FW 2.2. which supports 32-bit register data for Modbus RTU masters.

CPUE05-AD FW 2.31 which supports MODBUS Master; CPUE05-AC FW 2.30 which adds support for MODBUS Master.

CPUE05-AB FW 2.20 has additional serial I/O baud rate; CPUE05-AA FW 2.10 is the initial product version.

IC200CPUE05 Frequently Asked Questions

What are the supported mounting methods for the IC200CPUE05?

The IC200CPUE05 supports both horizontal and vertical DIN rail mounting.

What is the embedded communication interface of IC200CPUE05?

The IC200CPUE05 has one (1) RS232. one (1) RS485. and one (1) Ethernet communication port.

What is the number of ** modules supported by IC200CPUE05?

The IC200CPUE05 supports up to 64 modules or 2048 I/O points.

IC200CPUE05 Technical Description

The IC200CPUE05 module is a CPU controller module. It is manufactured by GE Fanuc in the Versamax series.

Related Product Recommendations: