GE Mark V Series DS200AAHAG1ADC ARCNET Connection Boards

The DS200AAHAG1ADC Mark V PCB is used as an ARCNET connection PCB.This unit was originally designed as part of the LM Series, which is part of General Electric's Mark V Speedtronic Series.

The LM series is part of General Electric's Mark V Speedtronic series. This series has been used for many years to control and manage industrial turbine systems.

This DS200AAHAG1ADC Printed Circuit Board or PCB for short, the larger Mark V turbine control system series was one of the last GE product lines to use its patented Speedtronic control system technology.

Although it is considered a legacy product line due to its eventual discontinuation years after its initial release.

This DS200AAHAG1ADC PCB is not the original printed circuit board product with features developed for placement in GE's Mark V series; it would be the DS200AAHAG1ADC PCB.

It will be DS200AAHAG1 missing all three female ARCNET connection boards for the three important product revisions of this DS200AAHAG1ADC device.

Hardware Tips and Specifications

This DS200AAHAG1ADC allows connection between externally placed modules or I/O cores and the control engine. This board is used to connect these units to the ARCNET communication protocol.

The board is used in combination with the UCPB board containing the 486DX processor/CPU and the UCIA main board containing the 196 processor chip. This chip is used to convert the pressure sensor signals.

Unfortunately, no Berg-type manual movement hardware jumpers or other customisable hardware is inserted into the internal components of this DS200AAHAG1ADC product.

This DS200AAHAG1ADC printed circuit board or PCB for short benefits from having a DS200AAHAG1ADC functional product number.

This number identifies many key hardware specifications, including this DS200AAHAG1ADC PCB:

. Common Mark V Series Assemblies

. Domestic Original Manufacturing Base

.AAHA Functional Product Abbreviation

. Normal PCB Coating Style

. Group I Mark V Series Product Grouping

.A Level Primary Functional Revision

.D Secondary Functional Revisions

.C level drawing configuration revisions

The DS200AAHAG1ADC includes multiple BNC connectors. They are used to download files to the control engine, which typically occurs at a rate of 100 Hz or 10 ms.

The board is commonly abbreviated AAHA and includes other connectors. the AAHA includes an APL ArcNet communication link and a 2PL connector for distributing power from the TCPS board in the core.

The other connectors on the board (such as EPL and EBNC) are usually unused. The board is marked with several factory-printed naming labels, starting with the GE logo.

It also includes its ID markings and codes to help the user with orientation and wiring. Most of the board's components are labelled with reference names.

The DS200AAHAG1ADC board's two relays include relay diagrams directly on top of them that are clearly visible to an installation or troubleshooting engineer or technician.

For more information about the DS200AAHAG1ADC board, refer to GE original manuals and user guides, such as GEH-6353B.

Frequently Asked Questions about the DS200AAHAG1ADC

What does the normal PCB coating pattern of this DS200AAHAG1ADC ARCNET connector board mean?

The normal PCB coating applied to the base board of this DS200AAHAG1ADC product is a thick, basic PCB protective surface coating that wraps and protects the individual DS200AAHAG1ADC board hardware components on a functional priority basis.

Are the three major revisions of this DS200AAHAG1ADC PCB considered backwards compatible?

No. The three major revisions of this DS200AAHAG1ADC PCB are not considered backwards compatible. The three revisions of this DS200AAHAG1ADC Board cannot be considered backward compatible because its assembly contains two separate revision styles.