GE 889 Generator Protection System Overview

Overview

The relay features generator unbalance, generator differential, over excitation, loss of

excitation, 3rd harmonic neutral undervoltage, over and under frequency, synchrocheck

and other essential functions with a basic order option. Additionally available with an

advanced order option are overall differential (to protect the transformer-generator

combined), directional overcurrent elements, restricted ground fault, 100% stator ground,

out-of-step protection, rate of change of frequency, power factor, harmonic detection,

frequency out-of-band accumulation and others. An optional RTD module allows for

thermal protection and monitoring. An optional analog inputs/outputs module allows for

monitoring of generator excitation current, vibration and other parameters.

These relays contain many innovative features. To meet diverse utility standards and

industry requirements, these features have the flexibility to be programmed to meet

specific user needs. This flexibility will naturally make a piece of equipment difficult to

learn. To aid new users in getting basic protection operating quickly, setpoints are set to

typical default values and advanced features are disabled. These settings can be

reprogrammed at any time.

Programming can be accomplished with the front panel keys and display. Due to the

numerous settings, this manual method can be somewhat laborious. To simplify

programming and provide a more intuitive interface, setpoints can be entered with a PC

running the EnerVista 8 Setup software provided with the relay. Even with minimal

computer knowledge, this menu-driven software provides easy access to all front panel

functions. Actual values and setpoints can be displayed, altered, stored, and printed. If

settings are stored in a setpoint file, they can be downloaded at any time to the front panel

program port of the relay via a computer cable connected to the USB port of any personal

computer.

A summary of the available functions and a single-line diagram of protection and control

features is shown below. For a complete understanding of each feature operation, refer to

the About Setpoints chapter, and to the detailed feature descriptions in the chapters that

follow. The logic diagrams include a reference to every setpoint related to a feature and

show all logic signals passed between individual features. Information related to the

selection of settings for each setpoint is also provided.