Product features
• Profibus slave
• Protocol DPV-1
• High interference immunity
• Electronic parameter chip
Short description
The FM 265/A is a Profibus slave interface module. It belongs to the communication modules of the KeConnect C2 pro
duct line. It enables the exchange of cyclical process data and acyclical parameter data between a KeControl C2 control
and any Profibus slave devices with a transmission rate of up to 12 Mbit/s.
These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus couplers.
Profibus DP interface
Master/slave 1x slave
Data transmission rates 9.6 kbit/s to 12 Mbit/s
Max. line length 100 m (at 12 Mbit/s) to 1200 m (at 9.6 kbit/s)
Galvanic isolation Yes, signal lines
Dimensions, weight
Height 120 mm
Width 22.5 mm front plate / 32.5 mm incl. K-bus plug
Depth 100 mm
Weight 140 g
Environmental conditions
Operating temperature +5 °C … +55 °C
Storage temperature-40 °C … +70 °C
Relative air humidity 10 % to 95 % (non-condensing)
Vibration resistance / shock resistance Acc. to EN 61131-2
General
Supply voltage 24 V DC from K-bus, 5 V from K-bus
Protection class III acc. to EN 61131-2
LED displays on the front plate Status and error
Max. operable on a CPU module 1x
Max. power consumption K-bus 24 V 0 W
Max. power consumption K-bus 5 V 1.4 W
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved