Eaton Inverter Drive DG1-34170FB-C54C

Description:

The DG1-34170FB-C54C drive is a variable frequency drive from Eaton.

The DG1-34170FB-C54C drive is designed to operate at 380 to 480 volts AC.

About the DG1-34170FB-C54C

The DG1-34170FB-C54C drive is a variable frequency drive. It is designed and manufactured by Eaton Corporation.

The dimensions of the drive are 888 x 290 x 34 mm. The drive enclosure is rated IP 54 or NEMA 12.The DG1-34170FB-C54C drive supports four-quadrant operation.

Communication interfaces available on the drive include Ethernet and RS-485 serial interfaces.

Communication protocols supported by the drive include BACNet, ProfiBus, DeviceNet, Modbus, CAN, and TCP/IP protocols.

The number of digital inputs on the drive is 8. The number of digital outputs is 1. The number of analogue inputs on the drive is 2.

The number of analogue outputs is 2. The DG1-34170FB-C54C drive is designed to operate at 50 to 60 Hz at 380 to 480 volts AC (3 phase) supply voltage.

The maximum output frequency is 400 Hz and the maximum output voltage is 480 volts AC. The nominal output current is 205 amperes.

The maximum output of the secondary load is 110 kW at rated output voltage. The maximum output for linear loads is 180 kW at rated output voltage.

The minimum ambient operating temperature for the DG1-34170FB-C54C drive is -10 degrees Celsius and the maximum ambient operating temperature for the drive is 50 degrees Celsius.

There are two expansion slots on the DG1-34170FB-C54C drive. The external control voltage is 24 volts DC and the maximum current input is 250 mA.

The drive has a rack size of FS5.The drive is equipped with radio interference suppression filters, PCB protection, a multi-line graphic display, a braking chopper and a DC connection choke.

A temperature controlled fan is also provided on the drive.