Beckhoff EL2809 | EtherCAT Terminal, 16-channel digital output, 24 V DC, 0.5 A

The EL2809 digital output terminal connects the binary 24 V DC

control signals from the automation device on to the actuators at

the process level with electrical isolation.

The EtherCAT Terminal has 16 channels, whose signal states are

indicated by LEDs. The power contacts are connected through.

The connection technology is particularly suitable for single-ended

inputs. All components have to use the same reference point as

the EL2809. In the EL2809 the outputs are supplied via the 24 V

DC power contact.

Special features:

• Connection of different load types possible (ohmic, inductive,

lamp load)

• Max. output current 0.5 A per channel

• Overload and short-circuit proof outputs and reverse polarity

protection

• Tool-free connection by direct plug-in technology for solid wire

conductors

• Space-saving use in the control cabinet

• Direct connection of multi-channel actuators in 1-wire connection

technology in the smallest space

• Increased packing density with 16 connection points in the housing

of a 12 mm terminal block