Beckhoff EL2808 | EtherCAT Terminal, 8-channel digital output

The EL2808 digital output terminal connects the binary 24 V DC

control signals from the automation device on to the actuators at

the process level with electrical isolation.

The EtherCAT Terminal contains eight channels whose signal state

is indicated by LEDs.

The power contacts are connected through. In the EL2808 the

outputs are supplied via the 24 V DC power contact.

Special features:

• Connection of different load types possible (ohmic, inductive,

lamp load)

• Max. output current 0.5 A per channel

• Overload and short-circuit proof outputs and reverse polarity

protection

• Tool-free connection by direct plug-in technology for solid wire

conductors

• Increased packing density with 16 connection points in the

housing of a 12 mm terminal block