PL240 Capacitive Sensor The new level detection specialist

Baumer's new product is here! Baumer's PL240 capacitive sensor is an excellent solution for level detection in tanks and pipelines.

With its excellent performance, easy installation and ease of use, the PL240 is an excellent new product to start the year with, as it allows for point level detection in the presence of films and residues.

New Products

The Baumer PL240 capacitive sensor uses an innovative and intelligent measuring principle to reliably perform non-contact level detection even under harsh operating conditions, such as film or residues on the inside of tanks.

The PL240 capacitive sensor provides reliable, non-contact point level detection even under demanding operating conditions, such as the presence of film or residues on the tank wall. Thanks to its technology, it is even possible to detect the level through plastic or glass vessel walls without direct contact with the medium.

Product features

1. Long detection distance

The detection distance is up to 6mm, even through the non-metallic container wall detection, in the detection of corrosive liquids in closed containers, food or laboratory liquids, or the need to avoid direct contact with foreign particles.

It has significant advantages in detecting corrosive liquids, food or laboratory liquids in closed containers, or when it is necessary to avoid direct contact with foreign particles.

2. non-contact detection

The PL240 is mounted on the outside of plastic or glass containers and reliably detects the point level of aqueous media such as cleaning liquids, milk or test liquids by means of pendant compensation.

Moisture and humidity hardly interfere with the sensor, as if the tank had been touched.

3. easy to install

The compact point level sensor can be quickly mounted directly on the tank or pipeline by means of adhesive tape, cable ties or screws.

4. adaptable

Even if affected by various environmental factors (such as ambient light or dust), but also to ensure reliable detection results.

5、Wide range of applications

Reliable detection of wafers, printed circuit boards (PCB), paper stacks, plastic containers and other objects, as well as powders, particles, liquids and other media.

Conclusion

As a newly developed point level detection sensor from Baumer, the PL240 point level switch can be quickly put into use without setup in many application scenarios, such as laboratory automation, equipment engineering and semiconductor production. It is a user-friendly solution for those who use intelligent fluid monitoring products, and it can help enterprises to effectively improve the detection of fine readings, reduce the cost of detection, and improve production efficiency!