ABB Singlemode SFP Module 500SSM11 EDS500 Series Ethernet and DSL Switches

- Medium-range (IR) SFPs with transmission distances up to 10 kilometers

- Suitable for all applications with SFP slots

- Duplex LC connector/single mode fiber

- Monitors optical signal quality/alarms Alerts prior to link loss

Applications

This Intermediate Reach (IR) SFP is a pluggable optical transceiver for fiber optic transmission lines up to 1.5 meters.

transceiver for fiber optic transmission lines up to 10 km.

10 km range. No minimum attenuation required.

This SFP type supports monitoring of receiver

input power as well as transceiver temperature and voltage (via DOM (Digital DOM)).

This SFP type supports monitoring of receiver input power as well as transceiver temperature and voltage (via DOM (Digital Optical Monitoring)).

Mechanical Form Factor and Electrical Interface

are compatible with the Multi-Source Agreement (MSA).

In addition, with this SFP type, optical signal quality and attenuation can be monitored.

quality and attenuation are monitored (e.g., the host supports SNMP). Signal Quality

Signal quality thresholds can be defined so that alarms can be raised before the optical link is broken (due to optical signal quality thresholds).

so that alarms can be raised before an optical link is lost (due to material deterioration or similar).