Advantest 6243/6244 DC Voltage/Current Source/Monitor

DC voltage/current source monitor ideal for

electronic circuit/component evaluation

by flexible source and measurement

l Wide ranging source/measurement

6243 Voltage: 0 to ±110V Current: 0 to ±2A

6244 Voltage: 0 to ±20V Current: 0 to ±10A

l 5½-digit display with 1μV/100pA (6243), 1μV/1nA (6244)

resolution in measurement

l Pulse measurement with a minimum pulse width of 1ms

l Sink-enabled bipolar output

The 6243/6244 is a DC voltage and current source/monitor

that offers wide ranging source and measurement as follows:

6243 Voltage: 0 to ±110V Current: 0 to ±2A

6244 Voltage: 0 to ±20V Current: 0 to ±10A

The 6243/6244 provides high accuracy with 4½-digit

source resolution and 5½-digit measurement resolution, a

variety of sweep functions, and a pulse measuring function

with a minimum pulse width of 1ms. Thus, it can be

used for a wide range of applications as a power source for

evaluation in research and development of semiconductors

and other electronic components or for characteristic test

systems in a production line.

For Characteristic Test for Transistor and FET

Synchronized operation

of the two units of the

6243/6244 allows characteristic

test of a transistor or FET. Id and Ig can be

measured simultaneously,

as controlling the source

timings of drain voltage

and gate voltage to protect

a device from stress.

● Linear, log and random

sweep functions

● Pulse measurement with

a minimum pulse of 1ms

● Me a s u r eme n t d e l a y

function for measurement timing control

● Source delay function

for source timing control

For Battery Charge/Discharge Test

The 6243/6244 is available for battery charge and discharge test at constant

current (CC) or constant voltage (CV) by DC or pulse application.

In a pulse charge and discharge test, measurement must be done at

the time of and after the pulse application.

Using two units will allow measurement at the two points above and

increase the current capacity up to 20A.

● Source sink current up to ±20A (7V)

● 20A (6244) and 4A (6243) by two-unit parallel operation

● Measurement at pulse HI/LO points

● Selectable from voltage measurement or current measurement