ABB Instrumentation 2600T Pressure Transmitter family Improper use

Improper use

It is prohibited to use the device for the following purposes:

• As a climbing aid, e.g., for mounting purposes

• As a support for external loads, e.g., as a support for pipes, etc.

• Adding material, e.g., by painting over the name plate or welding/soldering on parts

• Removing material, e.g., by drilling the housing.

Repairs, alterations, and enhancements, or the installation of replacement parts, are only permissible as far as these are described in the manual.

Approval by ABB must be requested for any activities beyond this scope. Repairs performed by ABB-authorized centers are excluded from this.

Technical limit values

The device is designed for use exclusively within the values stated on the name plates and within the technical limit values specified on the data sheets.

The following technical limit values must be observed:

• The Maximum Working Pressure may not be exceeded.

• The Maximum ambient operating temperature may not be exceeded.

• The Maximum process temperature may not be exceeded.

• The housing protection type must be observed.

Warranty provisions

Using the device in a manner that does not fall within the scope of its intended use, disregarding this manual,

using under-qualified personnel, or making unauthorized alterations, releases the manufacturer from any liability for any resulting damage.

This makes the manufacturer's warranty null and void.