Hardware Features
The module fits into any single slot for I/O modules in either an SLC
500 modular system or an SLC 500 fixed system expansion chassis
(1746-A2), except the zero slot which is reserved for the processor. It
is a Class 1 module using 8 input words and 8 output words.(2)
The module contains a removable terminal block providing
connections for eight thermocouple and/or analog input devices. On
the terminal block are two cold-junction compensation (CJC) sensors
that compensate for the cold junction at ambient temperature. It
should also be noted there are no output channels on the module.
Configure the module with software rather than with jumpers or switches.
IMPORTANT
There is a jumper (JP1) on the circuit board. The
module is shipped with the jumper in the up
position as illustrated below. Do not change the
position of JP1. The jumper is used for test purposes
only.
Hardware Features
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved