Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

ABB’s new Carlon fan-rated ceiling boxes raise the bar on home safety

From:ABB | author:Mr.Chen | Time :2024-06-27 | 331 view: | 🔊 Click to read aloud ❚❚ | Share:

.Engineered to meet the latest industry standards, the new Carlon® Blue™ fan-rated ceiling boxes from ABB Installation Products help protect and power residential and light commercial installations

.Supports growing demand for energy-efficient ceiling fans in home improvements and new construction

.Sustainably produced in Tennessee, extensively tested and backed by an Environmental Product Declaration, Carlon® Blue™ non-metallic electrical boxes are trusted by contractors and homeowners

More than 70% of American households have at least one ceiling fan, and nearly a quarter use four or more. Increasing demand for energy-efficient ceiling fans with integrated technology and smart features is spurring the need for properly rated support. The new Carlon® Blue™ fan-rated ceiling boxes from ABB Installation Products are engineered for easy installation and to safely support a fan’s weight, vibration and movement, in compliance with the latest National Electric Code (NEC) outlet box requirements for ceiling-suspended fans.

Improperly installed ceiling fans lead to an estimated 20.000 injuries annually in the United States. To help improve home safety, the 2020 NEC requires ceiling outlet boxes in homes, including rooms where ceiling fans may be installed now or later, to either be listed for the sole support of ceiling-suspended fans or provide access to structural framing capable of supporting a ceiling fan bracket. ABB’s Carlon Blue ceiling boxes are rated for a 50-pound light fixture and 35-pound ceiling fan, with vibration-resistant screws through reinforced metal brackets that provide greater strength than plastic alone.

“Ceiling fans are used year-round in millions of homes and are often an overlooked safety risk. Our new Carlon Blue fan-rated ceiling boxes address the needs of contractors and homeowners for a safe, smart and sustainable solution,” said Jack Bellissimo, Senior Vice President, Product Management, Marketing & Strategy, ABB Installation Products. “Authentic Carlon boxes in our distinctive blue color are responsibly produced in Tennessee and meet the 2020 NEC code to perform safely and reliably.”

Commitment to safety and circularity

ABB’s Carlon Blue fan-rated ceiling boxes conform to UL 514C and meet NEC 314.27 (C) requirements for use in habitable and non-habitable rooms. Designed for new construction, the 4-inch diameter round boxes are available with an L-bracket for secure fan mounting or an adjustable bar hanger to position between ceiling joists. These boxes are available with or without a grounding screw.

Made in Portland, Tennessee, Carlon® Blue™ non-metallic boxes are produced using repurposed material from injection molding processes, diverting nearly 110 metric tons of waste from landfills each year. Covered by a third-party verified Environmental Product Declaration (EPD), consumers can make informed decisions about the energy usage, resource consumption and emissions used to manufacture Carlon products installed in their homes.

Building on its long history of pioneering in electrification, ABB Installation Products creates solutions to safely connect and protect electrical systems that power businesses, cities, homes and transportation. With more than 200.000 products under 38 premium brand names, ABB Installation Products, formerly Thomas & Betts, solutions are found wherever electricity is used around the world and in space.

ABB is a technology leader in electrification and automation, enabling a more sustainable and resource-efficient future. The company’s solutions connect engineering know-how and software to optimize how things are manufactured, moved, powered and operated. Building on over 140 years of excellence, ABB’s more than 105.000 employees are committed to driving innovations that accelerate industrial transformation.

  • Kollmorgen AKT2G-ENC-180-000 1-Channel Incremental Encoder Interface
  • Kollmorgen AKT2G-ENC-190-000 Incremental Encoder Interface with Differential Input
  • Kollmorgen AKT2G-AT-425-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-AT-410-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-SDO-004-000 4-channel digital output terminal, Safety
  • Kollmorgen AKT2G-DT-008-000 8 Ch Digital Output 0.5A
  • Kollmorgen AKT2G-SDI-004 4-channel digital input terminal, Safety
  • Kollmorgen AKT2G-DNH-008-000 8 Ch Digital Inputs
  • Kollmorgen AKT2G-DN-008-000 8 Ch Digital Inputs
  • Kollmorgen AKT2G-DN-002-000 2 Ch Digital Input
  • Kollmorgen AKT2G-AN-400-000 4-channel thermocouple input terminal
  • Kollmorgen AKT2G-AN-240-000 2-channel input terminal for resistance sensors
  • Kollmorgen AKT2G-AN-430-000 4-channel analog input, parameterizable
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1561 | 1-port EtherCAT plastic optical fiber junction
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1521 | 1-port EtherCAT fiber-optic junction
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1400 | EtherCAT G Coupler
  • Beckhoff EK1322 | 2-port EtherCAT P junction with feed-in
  • Beckhoff EK1310 | 1-port EtherCAT P extension with feed-in
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1122 | 2-port EtherCAT junction
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2500-0021 | Audio interface for CX20x3
  • Beckhoff CX2100-0914 | Power supply unit for external battery pack for CX20x3 and CX2042
  • Beckhoff CX2100-0024 | 200 W power supply module
  • Beckhoff CX2100-0022 | 100 W power supply module
  • Beckhoff CX2100-0014 | Power supply unit for CX20xx, 130 W
  • Beckhoff CX2100-0004 | Power supply unit for CX2033, 45 W
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • BAUMULLER b maXX 5500 – The servo drive for higher output ratings
  • BAUMULLER b maXX 3000 Servo Controller BM3401-LIFBO-ACOOOCB-G-02-O-02
  • GE PCM Regulator for EX2100e Power Conversion Module 151X1235DB15SA1
  • Kollmorgen PCMM2G Essentials programmable motion controller
  • Kollmorgen Automation Suite™ Cables
  • LENZE g500-B + m500 bevel geared motors
  • LENZE g500-S + m500 shaft-mounted helical geared motors
  • LENZE g500-H + m500 helical geared motors
  • LENZE OCU series motor controllers
  • LENZE SMD frequency inverters
  • LENZE 8200 vector frequency inverters
  • LENZE 9300 vector frequency inverters
  • LENZE 9300 servo inverters
  • LENZE ECS servo inverters
  • LENZE MC series frequency inverters
  • LENZE 8400 BaseLine frequency inverters
  • LENZE SCF Frequency inverter in IP20 with V/f Control
  • LENZE SCM/SCL Frequency inverter in IP20 with V/f Control
  • LENZE 940 Servo inverter for controlled, dynamic motion
  • LENZE 8400 TopLine frequency inverter
  • LENZE 8400 HighLine frequency inverter
  • LENZE 8400 StateLine frequency inverter
  • LENZE 9400 HighLine servo inverter
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE SMVector IP65 frequency inverter
  • LENZE SMVector IP31 frequency inverter
  • LENZE 8400 motec frequency inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE 8400 protec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE ECSEA048C4B Axis Module
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX5340 | Embedded PC with Intel Atom® x6425RE
  • Beckhoff CX5330 | Embedded PC with Intel Atom® x6214RE
  • Beckhoff CX2500-M510 | Fieldbus master module
  • Beckhoff CX2500-M310 | Fieldbus master module
  • Beckhoff CX2500-B510 | Fieldbus slave module
  • Beckhoff CX2500-B310 | Fieldbus slave module
  • Beckhoff CX2500-0070 | USB 3.0 module for CX20xx, CX52xx, CX53x0, CX56x0
  • Beckhoff CX2500-0062 | 2.5 Gbit Ethernet module for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-1061 | Power over Ethernet module for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-0061 | Power over Ethernet module for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-1060 | Ethernet module for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-0060 | Ethernet module for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-0031 | Serial Interface RS485/RS422 for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-0030 | Serial Interface RS232 for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX5240 | Embedded PC with Intel Atom® x5-E3940
  • Beckhoff CX5230 | Embedded PC with Intel Atom® x5-E3930
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX5130 | Embedded PC with Intel Atom® E3827
  • Beckhoff CX5120 | Embedded PC with Intel Atom® E3815
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX8200 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX8190 | Embedded PC with Arm® Cortex®-A9 and 2-port Ethernet switch
  • Beckhoff CX8180 | Embedded PC with Arm® Cortex®-A9 and RS232/RS485
  • Beckhoff CX8110 | Embedded PC with Arm® Cortex®-A9 and EtherCAT slave
  • Beckhoff CX8095 | Embedded PC with Arm9™ and EtherNet/IP™ adapter
  • Beckhoff CX8093 | Embedded PC with Arm9™ and PROFINET device
  • Beckhoff CX8091 | Embedded PC with Arm9™ and BACnet/IP or OPC UA
  • Beckhoff CX8090 | Embedded PC with Arm9™ and 2-port Ethernet switch
  • Beckhoff CX8080 | Embedded PC with Arm9™ and RS232/RS485
  • Beckhoff CX8051 | Embedded PC with Arm9™ and CANopen slave
  • Beckhoff CX8050 | Embedded PC with Arm9™ and CANopen master
  • Beckhoff CX8031 | Embedded PC with Arm9™ and PROFIBUS slave
  • Beckhoff CX8030 | Embedded PC with Arm9™ and PROFIBUS master
  • Beckhoff CX8010 | Embedded PC with Arm9™ and EtherCAT slave
  • Beckhoff CX7293 | Embedded PC with Arm® Cortex®-A9, PROFINET RT device and integrated I/Os
  • Beckhoff CX7291 | Embedded PC with Arm® Cortex®-A9, BACnet/IP and integrated I/Os
  • Beckhoff CX7080 | Embedded PC with Arm® Cortex®-M7, RS232/RS485 and integrated I/Os
  • Beckhoff CX7051 | Embedded PC with Arm® Cortex®-M7, CANopen responder (slave) and integrated I/Os
  • Beckhoff CX7050 | Embedded PC with Arm® Cortex®-M7, CANopen commander (master) and integrated I/Os
  • Beckhoff CX7031 | Embedded PC with Arm® Cortex®-M7, PROFIBUS slave and integrated I/Os
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE i510 protec frequency inverter
  • LENZE i550 cabinet frequency inverter
  • LENZE i510 cabinet frequency inverter