Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply

X-DA4125EN

High Efficiency Power Amplifier

with 24 VDC Backup Power Supply

• Four channels 125W efficiency Class-D amplifier Automatic protection

• Fault detection

• Effective ventilation using forced air cooling fan

• CE complied

• With 24 VDC backup power supply

X-DA4125EN is the Class-D amplifier and it islighter, more stable,

and high efficiency. The audio transmission is completely digitalized

which makes it free from interference and easy to be controlled.

It also has 24 VDC backup power supply conforming to iternational

voice alarm standard which is the perfect choice for safety

required applications.

Features

INPUT/OUTPUT

X-DA4125EN supports both balanced and unbalanced audio inputs.

To receive unbalanced audio inputs, simply connect the ground port

with the negative input port to the rear panel. X-DA4125EN can receive

audio signal from XDCS2000/EN via Ethernet through the RJ45 standard

port.

FAULT DETECTION

X-DA4125EN can self-protect from overheat, over current, over voltage

and under voltage. For example, when the internal temperature reaches

its critical limit, the overheat protection circuit will shut down the power

amplification module and activate the protection indicator light on the

front panel.

X-DA4125EN can detect power supply errors automatically during operation.

The built-in fuse will provide over current protection to the main power supply.

When a shout circuit is detected in the main power supply circuit, the power

will be automatically shut down.The backup power supply will then be enabled

to replace the main one.

When a fault, self-protection or self-testing happens, its audio input fault por

on the rear panel will short circuit and a fault signal will then be sent to the

control unit in the network.

SAFETY

The device adopts lightweight design. The front panel is made of UL94V-0 fire

proof ABS material, protecting the machine under extreme conditions.

A cooling fan is equipped for heat exhaustion so that the machine can maintain

high working efficiency. The amplifier can work without main power in emergency.

VOLUME CONTROL

When HN-D32N Noise Detector is installed, X-DA4125EN can adjust volume

according to the ambient noise automatically to ensure high sound intelligibility.

INDICATORS

Ÿ Power light

Ÿ AC fault light

Ÿ DC fault light

Ÿ Signal light (for each channel)

Ÿ Clip light (for each channel)

Ÿ Protection light (for each channel)

INTERFACES

Ÿ Main power and 24 VDC backup power port

ŸAudio inputs (balanced or unbalanced)

Ÿ Audio outputs (100V or 70V)

Ÿ RJ-45 net cable port