Johnson Controls WNC1830/ZFR183x Pro Series Wireless Field Bus System

Related products

For information about the Metasys system and related

products, refer to Metasys System Product Bulletin

(LIT-1201526).

Controller Configuration Tool (CCT)

The CCT is used in conjunction with the  Metasys system

to configure, simulate, and commission equipment

controllers.

For information about using CCT for configuration,

simulation, and commissioning of the equipment

controllers, refer to Controller Configuration Tool (CCT)

Catalog Page (LIT-1900386).

Mobile Access Protocol (MAP) Gateway

The MAP Gateway is a pocket-sized web server that

provides a wireless mobile user interface to SMART

Equipment and Johnson Controls branded equipment

controllers and thermostats.

For more information on the MAP Gateway, refer

to the Mobile Access Portal Gateway Product Bulletin

(LIT-12011884).

Handheld VAV Balancing Tool

The Handheld VAV Balancing Tool lets you set the

parameters for VAV applications that reside on CV series

equipment controllers.

For more information on the Handheld VAV Balancing

Tool, refer to the Handheld VAV Balancing Tool Catalog Page

(LIT-1090348).

Network Sensors

The NS Series Network Sensor offering includes NS Series

Network Zone Sensors and NS Series Network Discharge

Air Sensors. The NS Series Network Zone Sensors are

designed to function directly with the  Metasys equipment

controllers.

For more product application information, ordering

information, and technical specifications, refer to the NS

Series Network Sensors Product Bulletin (LIT-12011574).

WNC1830/ZFR183x Pro Series Wireless Field Bus

System

The WRG1830/ZFR183x Pro (ZFR Pro) Series Wireless Field

Bus System provides a wireless platform for BACnet MS/

TP controllers using BACnet protocol over 2.4 GHz wireless

ISM band. For more information, refer to the WRG1830/

FX-ZFR183x Pro Series Wireless Field Bus System Technical

Bulletin (LIT-12013553).