Honeywell Spyder® BACnet® Programmable Controllers

PRODUCT DESCRIPTION

The PUB and PVB controllers are part of the Spyder family.

These controllers are BACnet MS/TP network devices

designed to control HVAC equipment. These controllers

provide many options and advanced system features that

allow state-of-the-art commercial building control. Each

controller is programmable and configurable through 

software.

The Spyder BACnet controllers require the Spyder BACnet

Programmable Feature to be licensed in the WEBpro

workbench tool and the WEBS AX JACE Controller for

programming and downloading. The Spyder BACnet

Models are also available as Individually Licensed

Controllers (ILC). The ILC versions are identical in design

and capability in every detail except for the licensing. The

Individual Licensing of the Spyder ILCs (the License is

built in) allows them to be programmed and downloaded

with any brand of the Niagara Workbench or JACE

controller. The Spyder ILCs are identified with a suffix on

the Part Number of -ILC. Example: PUB6438S-ILC follows

all the same Installation Instructions information as the

PUB6438S.

These controllers are for use in VAV (Variable Air Volume),

Unitary and advanced HVAC control applications. Each

controller has flexible, universal inputs for external

sensors, digital inputs, and a combination of analog and

digital Triac outputs.

FEATURES

• Uses BACnet MS/TP network communication.

• EIA-485 communications network. Capable of baud

rates between 9.6 and 115.2 kbits/s.

• Capable of stand-alone operation, but can also use

BACnet MS/TP network communications.

• Sylk™ bus for use with Sylk-enabled sensors.

• Support for up to 40 controllers per BACnet MS/TP

segment (under 30 is recommended).

• Field configurable and programmable for control,

input, and output functions using the NIAGARA

FRAMEWORK® software.

• Function Block engine, which allows the application

designer to program the controller to perform a wide

variety of HVAC applications.

• Built-in Zone Control functions include a remote wall

module interface and a scheduler.

• Pressure-independent or pressure-dependent single

or dual duct Variable Air Volume (VAV) control as well

as Unitary equipment control.

• Microbridge air flow sensor with dual integral restric

tor design (PVB0000AS, PVB4022AS, PVB4024NS,

PVB6436AS, and PVB6438NS).

• Easy user access to air flow sensor inputs.

• Actuator (PVB0000AS, PVB4022AS, and

PVB6436AS) mounts directly onto VAV box damper

shaft and has up to 44 lb-in. (5 Nm) torque, 90

degree stroke, and 90 second timing at 60 Hz.

• All wiring connections are made to removable

terminal blocks to simplify controller installation and

replacement.

• Both controller housing and actuator are UL plenum

rated.