Emerson FloBoss™ S600+ Flow Computer Inputs/Outputs

Inputs/Outputs

The S600+ is supplied with one I/O (P144) module with one Pulse Mezzanine (P148) module. 

This provides multiple digital, analog, and pulse inputs and outputs. You can add two additional expansion modules to the S600+. 

The following expansion modules are available:

▪ I/O (P144) module – Provides additional analog and digital I/O.

▪ Prover (P154) module – Provides I/O for applications with a prover.

▪ HART (P188) module – Provides I/O for applications with HART transmitters.

▪ Pulse Mezzanine (P148) module – Provides pulse input capability.

Note: The Pulse Mezzanine module is installed as a daughterboard on an P144 or P154 module, and does not use an additional module slot.

Configuration

Configuration of the S600+ is done through the same Windows-based intelligent set-up tool as the S600 (Config600 Lite, Config600 Lite+, or Config600 Pro).

You can create or edit configuration files using Config600 Lite+ and Config600 Pro (refer to Specification Sheet Config600). 

The S600+ provides the following functions through the Config600 configuration tool:

▪ Stream and station totalization.

▪ Batch totalization and retro-calculation.

▪ 3-term PID control with optional secondary control.

▪ Flow balancing.

▪ Flow scheduling.