Prosoft PROFIBUS DPV1 Master Communication Module PS69-DPM

The PS69 PROFIBUS DP Master module expands the functionality of ’s

CompactLogix / MicroLogix family of processors to include PROFIBUS. This

module supports both I/O control and messaging, thus integrating DPV0 and DPV1

functionality into CompactLogix / MicroLogix.

The PS69-DPM is a CompactLogix / MicroLogix compatible, PROFIBUS certified

module, which enables controllers to communicate with a PROFIBUS network. The

configuration and diagnostic of the PROFIBUS system is done via the serial

diagnostic interface of the module using the System Configuration tool . The data

exchange between controller and module is done via the I/O process data image

using CompactLogix / MicroLogix backplane technology.

DPV0 Services Supported

 Fail Safe Mode

 Global Control

 Sync and Freeze

 Watchdog

DPV1 Services Supported

 Read Request

 Write Request

 Alarm Indication

 Extended Device Diagnostics

Configuration

The Configuration for the PS69-DPM is done with our next generation configuration tool PROSOFT.fdt. The configuration software

and communication DTM are included with the module allowing easy configuration of the Master module and network slave devices.

The DTM can be used in any FDT compatible software container.

The configuration is transferred via the serial diagnostic interface and stored in the FLASH memory of the PS69-DPM module.

General Specifications

 Single Slot – 1769 backplane compatible

 The module is recognized as an Input/Output module and has access to processor

memory for data transfer between processor and module

 Ladder Logic is used for data transfer between module and processor. Sample

ladder file included.

 Supports all CompactLogix and MicroLogix 1500 LRP Controllers except 1769

L23E-QBFC1B, 1769-L16x, and 1769-L18x