GUTOR PDW AC UPS

Gutor PDW is an industrial online double conversion three-phase UPS

system with thyristor-controlled rectifier and IGBT-PWM inverter

designed to secure the critical applications in harsh environment.

Designed for Harsh Environments

• Transformer base provides full galvanic

isolation to prevent electric shock and

suppress harmful electrical noise

• Robust industrial enclosure up to IP42/NEMA 2*

•  Seismic design for peak spectral acceleration up to 1.0 g*

•  Operation temperature up to 55°C

•  Printed circuit boards have conformalcoating to protect against

moisture, dust,chemicals, and temperature extremes

•  Tinned copper bars for harsh environment are available as an option

Adaptable and qualified design

• Extensive range of input and output voltage

•  The rectifier is sized to simultaneously

supply 100% load and boost charge the

battery

•  Strong chargers support various battery

types and address long backup time

Highest Reliability

• High Mean Time Between Failures (MTBF)

•  Long product lifetime with minimal servicing

required

•  Parallel or redundant capable to increase

availability

•  Its controller firmware and hardware are

compliant with IEC 60880 for NPP (Nuclear

Power Plant) applications

•  Independent System Surveillance (ISS)

provides a health supervision of all the

critical components to prevent the system

from freezing and shutdown

Smart communication

• Display with 7 languages

• Relay board, 16 fail-safe NO/NC contacts

•  A wide communication protocol allows Gutor

PDW to be seamlessly integrated into your

monitoring system– Freely programmable alarms and meters

– Communication via modbus, TCP / IP,IEC 61850. RS485

– Web interface for remote monitoring– Gutor PDW supports

EcoStruxure

•  Cybersecurity according to IEC62443 to meet

requirements from GPDR and California law SB-327

Basic configuration

•  Single UPS

•  Rectifier input switch

•  Input & output transformers

•  Fixed charging voltage IU characteristic

•  Thyristor-controlled 6-pulse rectifier (supplies 100% load

and charges the battery simultaneously)

•  Bypass static switch EN

•  Battery-capacity test (full discharge with current load)

•  Human-machine interface with additional

LEDs for direct alarm display

•  Bottom cable entry with ground terminal

•  Alarm relays for battery operation, common alarm

and others

•  N+1 monitored two-speed fans

•  Ambient temperature ranges from -10 to +40 °C

•  Protection IP20

•  Pearl light gray, RAL7035 structure

•  Battery MCCB in UPS

•  3-position manual bypass switch

Power Modules

•   Separate power modules for rectifier and inverter

•   Modules can be kept on stock for fast servicing

•   Monoblock design leading to high MTBF

Wide range of Battery Supported

• Lead-acid, NiCd, Li-ion and sodium nickel batteries

• Support 110. 220. & 400 battery levels

• Transformer Accepting Wide Input Ranges

• Input & output transformers as standard

• Optional bypass transformer

Mechanical Structure

• Flexible configuration

• Up to IP 42 (higher on request)

• Customized cabinet colours

•  Seismic design robust cabinet up to 1.0 g

(reinforcement upon request)

Optional Features

• Redundant/Parallel Load Sharing Configuration

• Redundant/Parallel Dual Configuration

• Input harmonic filter

• Voltage adaptation for rectifier, bypass or output

• Higher system ratings

• Bypass transformer or stabilizer

• Analog and digital meters (72 x 72mm or 96 x 96mm)

• Digital outputs (NO/NC relay output)

• Communication (NMC, RS-485 Modbus or TCP, IEC 61850)

• Inverter static switch EA

• Independent static bypass switch (ISBS) control

• Voltage limiting unit (to withstand Forsmark event)

• DC & AC ground fault alarm

• Customized footprint

• Air filters, color, space heaters, panel lighting

• Battery protection (Fuse, MCCB)

• Battery temperature alarm

• Battery monitoring system

• Battery coupling

• Downstream distribution

• Converters (AC/DC, DC/DC)