Kollmorgen P8000 Stepper Drive Series

The P8000 Stepper Drive Series is Kollmorgen's latest flagship stepper drive platform. These drives offer expanded output current ranges and functionality that enable our customers to use a wider portfolio of Kollmorgen stepper motors. They are ideal for labelers, indexers, CNC machines, packaging machines, pumps and other applications requiring low-speed, point-to-point motion control for fixed loads. Currently available for AC and DC operation, these drives are designed to power 2-phase hybrid stepper motors.

The New P8000 Family Delivers Advanced Functionality

Smooth motion across the speed range. The P8000 Series stepper drives utilize a sophisticated control algorithm that optimizes the output current to the motors phases, whether full-stepping or micro-stepping, that results in smooth, quiet motion across the full speed range.

Worldwide availability and support. The P8000 Series stepper drives are backed by the world-class support and expertise of our Kollmorgen Customer Service team from the motor + drive selection and sizing to assistance in setup + troubleshooting. All drives feature CE, RoHS and REACH certifications. In addition, P80360 drives feature UL certification.

Faster Setup with Kollmorgen motors. The Motor Wizard features within Kollmorgen Space and Kollmorgen Studio allow P80360 users with Kollmorgen motors to get their machines running faster. With these features, only the initial profile velocities and acceleration times are required to get your system going. The P80630-SDN features dip-switch selectable settings for phase current, idle current reduction and step resolution (up to 1/128 microstep)—no programming required.

P80630-SDN

Superior Power-to-Size ratio. Compared to the 6410 drive, the new P80630-SDN achieves 10% greater output current in a 60% smaller package

P80360 Family

Minimize Errors with Closed-Loop Position Control. The P80360 drives features Closed Loop Position Control when using an incremental encoder. Allowing users to actively track and correct for position errors, minimizing the risk of scrap and potential equipment damage.

Solve Difficult Motion Challenges With Full Programmability. The P80360-R4E drive utilizes our Kollmorgen Space software to offer programming capability ranging from simple point-to-point movements to complex, linked motion sequences. The versatility and functionality of this software allows user to eliminate the need for an external PLC or indexer for single-axis motion control, which reduces the overall system cost.

EtherCAT Capable. The P80360-ECE drive features an EtherCAT communication interface that supports Cyclic Synchronous Position (CSP), Cyclic Synchronous Velocity (CSV), Profile Position, Profile Velocity and various Homing modes. With this portfolio addition, users can now integrate the P80360 stepper drive into existing EtherCAT ecosystems enabling real-time control for increased throughput and machine capability.

Features

P80630-SDN:

Single 24-75VDC power supply input required

Bipolar chopper drive for superior current regulation and low ripple current

Conventional Step and Direction interface. User provided pulse train to rotate the motor

Dedicated inputs for Step, Direction (CW/CCW) and Enable

Dip-switch selectable settings. No programming required!

Idle Current Reduction to reduce motor heating during dwell or when holding a load

Microstepping resolution up to 25.600 steps/revolution

Motor Phase Current up to 5.5 Arms/phase to pair with widest range of Kollmorgen motors

Fault Protection:

Thermal Protection (Over-Temperature)

Over-Current

Over/Under Bus Voltage

Short Circuit (Phase-to-Phase or Phase-to-Ground)

CE, RoHS, REACH certified

P80360 Drives:

100-240VAC, single-phase power supply input required.

Dual STO Channels (SIL3/PLe).

Mandatory 24VDC power supplies required to operate the drive.

(-ECE Version) EtherCAT subordinate drive using CANOpen over EtherCAT (CoE) conforming to DS402 standard

Optional Kollmorgen Studio Software (free download in Software tab) for motor setup, parameterization and debugging. EtherCAT Master may be used as well.

(-R4E Version) Programmable drive with Modbus RS485 RTU onboard