Foxboro 4-Port,10 Mbps (P0972WE) Ethernet Hub ETHERNET HUBS AND SWITCHES

DIN Rail Mounted 5-Port 10/100 Base TX Switch

The 5-port 10/100 base TX Ethernet switch

(P0972WE) is Din rail mounted and available for use

with the FBM232. You can connect up to four

Ethernet devices using this 5-port switch.

Additionally, multiple switches can be interconnected

to connect up to 64 devices to a single FBM232.

For detailed physical and electrical specifications,

refer to Model SFNB 5TX 2891001 at

www.phoenixcontact.com/us/products.

Rack and Chassis Mounted Fast Ethernet

Switches

Fast Ethernet Switches

For information on the Fast Ethernet switches, refer

to The MESH Control Network Ethernet Equipment

(PSS 21H-7C3 B4).

4-Port 10 Mbps Hubs for ISO/DIN Rail

The 4-Port 10 Mbps Industrial Hubs are DIN rail

mounted and support 10 Mbps Ethernet protocol

to/from devices that communicate at speeds of

10 Mbps. You can connect up to three Ethernet

devices using one 4-Port hub. Multiple hubs can be

interconnected to connect up to 64 devices to a

single FBM232.The hub mounts on an ISO/DIN rail and the 24 V dc

can be supplied redundantly from the FPS400-24 to

the hub.

A terminal block contains an integrated indicator

contact, receiving error and warning messages of the

hub which are defined as digital signals. These

signals, for example, can be utilized as process

messages when connected to a digital input FBM.

The indicator/contact becomes active as soon as

disturbances appear in the hub, that is, when a

power supply should fail or at least one twisted pair

port reports a faulty link status or has autopartitioned.

For diagnosis there are LEDs available which indicate

fault, link status, segmentation, power and received data.