Overview
The Orbit 60 Series Protection and Condition Monitoring System provides a single platform for the
continuous online monitoring of both critical and plant-wide applications. The Orbit 60 Series system
is deployable in any combination of rackmounted and distributed hardware, with Bridge modules
creating a seamless connection between chassis to make a single system.
You can flexibly deploy each chassis option with a public facing side (for rack or panel mounts) and a
utility side (for wiring connections and bulkhead mounts). Insert modules and make all wiring
connections from the utility side. Provisions for the public side of the chassis include status LEDs,
configuration port, Config/Run key, and reset button. Three chassis types are available.
Mounting Options
• Panel Mount – Mounts to rectangular cutouts in panels and secures to the panel using clamps
supplied with the chassis in 3U Mini*, 3U 19" standard, and 6U 19" standard* configurations. The
6U 19" will fit in the space of a 3500 rack.*
• Rackmount – Mounts the 3U or 6U chassis on 19-inch EIA rails. Two 3U units or a single 6U* form
factor have been designed to fit within the space of a single 19” rackmount 3500 unit, as a
retrofit.
• Bulkhead - Typically mounts into a protective enclosure fastened to a sub panel in 3U Mini*, 3U
19" standard, and 6U 19" standard* configurations. NEMA 4 and 4X weatherproof housings are
available when required for environmental protection or when purge air is used.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved