Description
The Communication Gateway Module (CGW) provides information to external hosts including measurements,
alarms, statuses, and system controls using standard industrial protocols.
The CGW is designed for integration with process control and other automation systems.
The Communication Gateway module occupies a single slot and has two
RJ-45 Ethernet ports supporting Modbus and EGD protocols.
PROFINET protocol is supported on the CGW's Port A Ethernet port.
The module OK LEDs indicate when the module is functioning properly,
and the LINK LED indicates when the module is communicating to the rest of the system.
The Comm Gateway Module includes two Ethernet ports which provide
TCP/IP communications capabilities.
The supported industrial protocols are:
• Modbus TCP/IP: Modbus over Ethernet is available for
connection to HMI’s, unit control systems, or other plant
automation equipment. The module can only be
configured as a server and supports configurable
Modbus addresses within the 40000 address range.
• Ethernet Global Data (EGD): EGD is a GE protocol used
on Mark VI and Mark Vie controllers and by GE
Programmable Automation Controllers and certain 3rd
party automation equipment. Version 3.04 and
backward compatibility with previous versions is supported.
• PROFINET (Process Field Network): is an open Industrial
Ethernet communication protocol used for real-time data
exchange between controllers and devices in industrial automation.
The CGW operates as a PROFINET device, protocol specification V2.45
(including backwards compatibility), Conformance Class B, Real Time Class 1.
The CGW PROFINET implementation supports a point-to-point (direct) network
connection from the CGW to the PLC.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved