Emerson DeltaV™ Cabinet Nameplate

• Standardized labeling for DeltaV™ equipment cabinets

• High quality injection molded plastic construction

• Insert provides space for three lines of information

• Insert can be easily inserted and removed if required

Introduction

The DeltaV nameplate holder and insert provides an economical and standardized

method to use for labeling and identifying DeltaV equipment cabinets.

The recommended cabinet nameplate mounting placement is shown at the right.

Product Description

The DeltaV cabinet nameplate holder is 14.05” w x 2.5” h and made of high-quality,

injection molded plastic with a polished chrome and black finish.

The nameplate holder comes ready to mount with a die-cut adhesive backing and

also through holes for mounting with optional fasteners. A window in the middle

of the nameplate holder houses a 8” w x 2” h nameplate insert.

The nameplate insert is captive in the nameplate holder, but can be easily inserted and

removed if needed.

The nameplate insert is a Gravoply 2. 2-ply, black matte surface color with white

core material that is 0.062” (1.57 mm) thick. The insert can be engraved with up to three

lines of customer- supplied cabinet and or equipment identification information.

The recommended spacing for engraving is shown below.

Recommended Nameplate

Lettering Spacing

The DeltaV cabinet nameplate holder is 14.05” w x 2.5” h and made of high-quality,

injection molded plastic with a polished chrome and black finish.

The nameplate holdercomes ready to mount with a die-cut adhesive backing and

also through holes for mounting with optional fasteners.

• Row A/B engraved characters should be 0.375” (9.5 mm) and show white core

• Row C engraved characters should be 0.1875” (4.76 mm) and show white core

• Engraved characters and lines of lettering should be centered on the nameplate