Motorola MVME333-2 Controller Communication Module

Features:

6 serial I/O ports

Supports synchronous and asynchronous communication

128 Kb of dynamic RAM

High-speed bi-directional DMA on two channels

The Motorola MVME333S-2 is a VMEbus intelligent communications controller with six serial I/O ports that can be configured for synchronous or asynchronous and RS-232C or RS-422 electrical protocols.

On-board intelligence includes the MC68010 10 MHz CPU with two slots for firmware and 128 Kb of dynamic RAM for data buffering.

It has firmware for asynchronous protocols on all six channels (up to 9600 baud in both directions on all channels simultaneously).

In addition, there is a high-speed bi-directional DMA for synchronous protocols up to 1 Mb/s on two channels.

MVME330

Provides a high-performance 10 Mbps Ethernet interface with MC68000MPU, MK68590LANCE Ethernet controller, AM7991 Seria!1/0 adapter, and on-board EPROM with power-on self-test routines and kernel software for data rates up to 200 1 Kbytepackets/sec.

MVME331

VMEbus intelligent communications controller with six serial l/0 ports configurable as synchronous or asynchronous, and RS232C or RS-422 electrical protocols. The module also comes with firmware to implement synchronous protocols on all six channels (all channels simultaneously in both directions up to 9600 baud).

MVME332

8-channel intelligent serial communication controller for synchronous and asynchronous communication (RS232C). The module contains the MC68010 and 128K bytes of dynamic RAM, expandable to 512K.

MVME333

Same as the MVME331. but with the addition of high-speed bi-directional DMA on two channels for high-speed (up to 1Mb/sec) synchronous protocols, i.e., X.25 packet-switched networks.

MVME340

The VMEbus Parallel I/O module provides 64 parallel I/O lines: three 24-bit timers; three interrupters; one 32-bit and one 16-bit data channel, or any combination of 16-bit and 8-bit data channels; and 4GB, 16Mb, or 64Kb address ranges.

MVME350

Intelligent Streaming Media Tape Controller Module, M68010 processor-based, 128KB on-board RAM, QlC-02 interface: firmware installed.

MVME390

Color Graphics Controller Module, 1K x 1K Dual-Port Display Memory, Eight Colors in 4096 Palette (3 pIanes), TTL RS170/RS343A: RGB Output, 50/60 Hz Screen Refresh Non-Interlaced.

MVME700

Transition and Mass Storage

l/O transition module, double-height 80 mm Eurocard format, wrap-around board.

MVME701

l/O Transition Module Dual height 80 mm Eurocard, DlN to DB25 and 50-PiN dual row headers provide connectors for the MVME050 serial and parallel ports; and a battery backup (user-installed) for the MVME050 Daytime Clock.

MVME702

Provides Winchester cable termination logic. Provides Winchester cable termination logic.

MVME7O5

I/O conversion module doubleie-high80m:nEurocard format or six-channel serial transceiver module, each channel can be independently configured to RS-2320 or RS-422 standards, with on-board sockets provided for plugging in RS-232C or RS-422 driver and receiver devices which are supplied with the module to provide free space for the user.

MVME706

Same as MVME705 but all channels are now RS-232C compliant.

MVME707

MVME130 RS-232C Power Distribution Board with RS.232C serial l/0 cable assembly. Designed to interface with the MVME130/131.