Johnson Controls Metasys General Purpose Application Controllers

Overview

The Metasys General Purpose Application Controllers

(CGs), VAV Box Controllers (CVs), and Input/Output

Expansion Modules (XPMs) are a new, modernized family

of equipment controllers which integrate in the web-based

Metasys system.

CG and CV Series Equipment Controllers

The CG and CV series equipment controllers are versatile

equipment controllers designed to monitor, control,

and integrate a wide variety of HVAC and other building

equipment. CGM controllers support BACnet® MS/

TP and N2 communication protocols, and auto-detect

which protocol is connected to it. In MS/TP mode, these

equipment controllers are BACnet network-compliant

devices. Controllers running in N2 mode can be used to

maintain or modernize sites with installed legacy Johnson

Controls® controllers.

The CG and CV series equipment controllers feature an

advanced design that provides optimum performance.

These controllers run pre-engineered and user

programmed applications and provide the I/O required

to monitor and control a wide variety of HVAC equipment.

These controllers are designed to install easily and

communicate through standard RS485 BACnet MS/

TP protocol, which enables you to build a variety of

equipment controller network applications, ranging from

simple fan coil, heat pump, or VAV control applications

to advanced central plant management and stand-alone

applications. The CG and CV series equipment controllers

also provide easy access to power, network, and field

terminations.