Merlin Embedded MVIPC-616 4-Slot VMEBus IndustryPack Carrier Specifications

Specifications

• IndustryPack Slots - 4

• I/O Space - A16 space, 128 bytes per IndustryPack slot

• ID Space - A16 space, 128 bytes per IndustryPack slot

• Memory Space - A24 space: none or 128 KB to 2

MB per IndustryPack slot. A32 space: 8 MB per

IndustryPack slot fixed

• Interrupts - IndustryPack interrupts mapped 1:1 to

VME IRQ levels by shunt or PLD selections.

• Front Panel I/O Access - One pair of 50-pin right

angled keyed, shrouded ribbon cable connectors with

ejection hardware for each pair of IndustryPack slots

• Back Panel I/O Access - All 50 I/O pins from slot D

and a configurable selection of 14 pins from slot C

routed to VME bus P2 rows A and C

• Indicators - 1 green LED per slot to indicate

accesses. 1 green LED to show power to slots A and

B. 1 green LED to show power to slots C and D

• IndustryPack Site Features - 8 MHz only. IO cycles,

ID cycles, memory cycles, interrupt acknowledge

cycles. 32-bit interface and IndustryPack DMA are

not supported.

VME Specifications

• Conforms with VME Specifications Revision C.1

IEEE Std. 1024/D2

• Board size: 6U

IndustryPack Specification

• ANSI/VITA-4 1995

Power Requirements

• +5V @ 500mA max

• +12V @ 10mA

•-12V @ 10mA

Environmental

• Operating Temperature: 0 to 70 °C

• Storage Temperature: -40 to 85 °C

• Shock: 25g, 11ms on all axis

• Humidity: 80% Rel. Humidity, non-condensing