Woodward IKD 1 Digital I/O Expansion Board

APPLICATIONS

The IKD 1 is a smart solution to increase

numbers of digital I/O’s to Woodward easYgen

series controllers and GCP-31/32 packages

equipped with option SC10 or SC09.

It is possible to connect one or more IKD 1

units to the genset controllers (see table

Related Products below).

Each of the inputs can be assigned a name,

alarm class, NO/NC configuration and time de

lay. The name and class are displayed on the

connected genset controller’s display.

The IKD 1 output relays are controlled over the

CAN bus connection from the main genset

controller. Configuration of the IKD 1 is

performed through the relay manager in the

main controller and transmitted to the IKD 1.

A direct configuration cable (DPC) and software

can be purchased for use with a PC or laptop

and may be advisable for extensive

configuration applications or where several

similar units are to be set up.

Related Products

max. # of IKD 1

•GCP-3… XPQ+SC09 2

•GCP-3… XPQ+SC10 2

•easYgen-1000 series 2

•easYgen-2000 series 2

•easYgen-3100P1/3200P1 2

easYgen-3100P2/3200P2 4

•easYgen-3400/3500P2 4