TYPICAL APPLICATIONS
The digital inputs are read by the IKD 1 and transferred via the
CAN bus to the control unit (incl. alarm class). Each alarm
input may have a delay as well as the control logic (NO/NC)
configured individually during set up. The status of the alarm
input is monitored in the control device and will show the alarm
text in its display. The alarm class assigned in the control
device evaluates the alarm input and reacts accordingly.
The control device’s relay manager controls the IKD 1 relays.
The control logic for each IKD 1 relay can be programmed
individually in the control device. Logical commands can be
configured using internal events as well as the status of the
digital inputs coming from the IKD 1.
If a discrete input on the IKD 1 is enabled, the control device
displays a text message and the control functions of the alarm
class are executed (refer to all manuals relating to the control
device). The control device must operate the IKD 1 relays.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved