GE Fanuc IC693CPU363 Single slot CPU module

The IC693CPU363 is manufactured by GE Fanuc. This module is a controller

from the Series 90-30 of Programmable Logic Controllers (PLC). 

This controller is responsible for executing the user program stored within its user memory

as well as managed communication exchanges between compatible devices such as programming workstations,

Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), Databases and other 3rd party hardware and devices.

The IC693CPU363 features a 80386EX processor with clock speed of 25 MHz and typical scan rate of 0.22 ms per 1K of logic for Boolean contacts.

The embedded memory of this controller amounts to 240KB which is internally partitioned

to accommodate different registers and internal functions.

It has Two (2) serial ports, One (1) port having a physical interface of RJ45 while the other port having a 15-pin sub-D connector,

both supporting RS232 and RS485 communication standards.

It also has a tertiary RS485 port which is situated on the power supply.

All these ports allow download, upload of user program, perform commissioning tasks and fine tuning of the program.

These ports operate independently and may be configured for simultaneous operation to accommodate

other data exchange functions such as communication with visualization components.

Other communication protocols supported by the IC693CPU363 are Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.