Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

GE Fanuc IC670MDL641 Discrete Input Module

From:GE | author:Mr.Chen | Time :2024-12-24 | 713 view: | 🔊 Click to read aloud ❚❚ ▶ | Share:

The 48 VDC Positive/Negative Input Module (IC670MDL641) provides a single group of 16 discrete inputs, which may be driven by positive or negative logic.

Power Sources

The module receives power from the Bus Interface Unit for its own operation. An external 48

VDC supply is needed to power the input devices.

LEDs

Individual LEDs (logic side), visible through the transparent portion of the module top,

indicate the On/Off status of each input. The PWR LED is On when field and backplane

power are present.

Host Interface

Intelligent processing for this module is performed by the Bus Interface Unit or elsewhere in

the system. This includes configuring features such as input defaults and fault reporting.

The module has 16 bits (two bytes) of discrete input data. A Bus Interface Unit is required

to provide this input data to the host and/or local processor.

Module Operation

A network of resistors, capacitors, and zener diodes establishes input thresholds and provides

input filtering. Optoisolators provide isolation between the field inputs and the module’s logic

components. An oscillator and switch form a sampling circuit that is transparent to the

controller and the LEDs that indicate the state of the inputs. Data from all 16 inputs is placed

into a data buffer. The module’s circuit LEDs show the current states of the 16 inputs in this

data buffer.

Parallel-to-serial converters change input data from the data buffer into the serial format

needed by the Bus Interface Unit.

After checking the Board ID and verifying that the module is receiving appropriate logic power

from the Bus Interface Unit (which is reflected by the state of the module’s Power LED), the Bus

Interface Module then reads the filtered, converted input data.

Positive or Negative Inputs

Inputs for this module can be either positive or negative (all 16 inputs must be the same type).

Both types of signal produce a logic 1 (true) when the switch is closed. Selection of positive or

negative operation is made by the manner in which the external power supply is connected to

the inputs and to the I/O Terminal Block.

Positive inputs receive current from input devices and supply current to the common or

negative power bus. Input devices are connected between the positive power bus and the input

terminals.

Negative inputs provide current to input devices and accept current from the common or

positive power bus. Input devices are connected between the negative power bus and the input

terminal.

 Field Wiring

The following illustration shows terminal assignments for the 48 VDC Positive/Negative

Input Module.

Connection to the A terminals is optional. They can be used as shown on the next page.

The Terminal Block with box terminals has 25 terminals for each module, each of which

accommodates one AWG #14 (avg 2.1mm2 cross section) to AWG #22 (avg 0.36mm2 cross

section) wire, or two wires up to AWG #18 (avg. 0.86mm2 cross section). When an external

jumper is used, the wire capacity is reduced from AWG #14 (2.10mm2) to AWG #16

(1.32mm2).

The I/O Terminal Block with barrier terminals has 18 terminals per module. Each terminal

can accommodate one or two wires up to AWG #14 (avg 2.1mm2 cross section).

The I/O Terminal Block with Connectors has one 20-pin male connector per module. The

mating connector is Amp part number 178289–8. Any tin-plated contact in the AMP D–3000

series can be used with the connector (Amp part number 1–175217–5 for high contact force

receptacle for 20–24 gauge (0.20–0.56mm2) wires), 1–175218–5 for high contact force

receptacle for 16–20 gauge (0.56–1.42mm2)).

Wiring Examples with Auxiliary Terminal Blocks

If the module is installed on an I/O Terminal Block with Box Terminals or an I/O Terminal

Block with Barrier Terminals, an Auxiliary Terminal Block may be required to provide

additional wiring terminals. For the I/O Terminal Block with Wire to Board Connectors,

external connection points are usually be preferred, although an Auxiliary Terminal Block

can be used..

Auxiliary Terminal Blocks have all terminals connected together internally. The Auxiliary

Terminal Block with box terminals has 13 terminals, each of which accommodates one AWG

  • Yokogawa PW501 Power Supply Unit
  • Basler Electric PT PT Sensing Card
  • Basler Electric IDP-1201 Interactive Display Panel
  • Basler Electric DXCB-2 De-Excitation / Crowbar Module
  • Basler Electric FGD-2 Field Ground Detection
  • Basler Electric IT-2 Isolation Transducer
  • Basler Electric DIOM-2 Digital Input Output Module
  • Basler Electric AIOM-2 Analog Input Output Module
  • Basler Electric BCM-2 Bridge Control Module
  • Basler Electric ECM-2 Excitation Control Module
  • Basler Electric SSR 32-12 Static Voltage Regulator 9 1859 00 100
  • Basler Electric TRR00696 TRANSFORMER; 346/380/415V PRI, 115 V SEC 1KVA, 50/60HZ
  • Basler Electric AEC63-7 Analog Excitation Controller 220-277v 50-60hz
  • Basler Electric BE1-25 M1EA6PA5S1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric 9 1049 04 100 PC BOARD
  • BASLER 125-12 STATIC VOLTAGE REGULATOR
  • Basler Electric Reactor BE12819001, 3.84 KVA
  • Teradyne 535-100-00 Basler Electric 9368200100 Power Supply
  • Basler Electric BE4-51 Electric Time Overcurrent Relay
  • Basler Electric 9 2849 00 101 Desc Power Module
  • BE1-67 B1E Z2J A3C3F Basler Electric Directional OC Relay
  • Basler Electric PRP110 90 55600 100 Reverse Power Solid State Protective Relay
  • Basler Electric BE30631001 Transformer
  • Basler Electric SSR 32-12 Static Voltage Regulator Sensing 120-600V 50/60/400Hz
  • Basler Electric MVC236 / MVC236 Manual Voltage Control
  • Basler Electric 9040000100UFOV UNDER FREQUENCY/OVERVOLTAGE PROTECTIVE MODULE
  • Basler Electric SR4A2B10A3E / SR4A2B10A3E Static Voltage Regulator
  • Basler Electric BE1-25 M1EA7TN5R1F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric BE 12296 001 HOBART 111983-2 TRANSFORMER
  • Basler Electric 905970-104 REV.M VOLTAGE REGULATOR
  • Basler 9262103004 Voltage Regulator Board For Basler DECS-4+A451:A48200
  • Designed to Protect PWM-type Basler ICRM-7 Inrush Current Reduction Module
  • Basler Electric KR4F VOLTAGE REGULATOR 9042600100 600V 50/60Hz
  • Basler Electric 9 2226 00101 NSNB
  • Basler Electric BE303280001 Transformer
  • Basler Electric BE1-25 M1FA6PA4S0F SOLID STATE TIME OVERCURRENT RELAY
  • Basler Electric SR4A2B05B3E Static Voltage Regulator SVR w/o Cover
  • Basler Electric BE127 Under Voltage Relay A3EA1JA0S5F
  • Basler Electric 3300C03B1028-G01 Super Spike Suppressor
  • Basler Electric BE32965001 Transformer With Cissell TU12874 Timer Board Kit
  • Basler Electric D90 96801 100 PCB CARD
  • BASLER BE1-81 / BE1-81-T1E-E1C-A0N1F / 9106400 UNDERFREQUENCY SS RELAY DAMAGED
  • Basler Electric 3280024-14 AGP3600-T1-D24 12.1" FLEX Network HMI Touch
  • Basler Electric SR4A2B10B1A Static Voltage Regulator
  • Basler Electric SR8A2B05B3A Static Voltage Regulator
  • Basler Electric BE34062001 G18 Transformer N And P Voltage F840101
  • Basler 9269101107 Voltage Regulator Board For Basler DECS-400
  • Basler Electric SR32A-2B13B3E STATIC VOLTAGE REGULATOR
  • DECS100-B15 Basler Automatic Voltage Regulator For Basler Electric Generator
  • Basler Electric SR8A-2B15B3A STATIC VOLTAGE REGULATOR SR8A2B15B3A
  • Basler Electric SR4A-2B16B3A STATIC VOLTAGE REGULATOR
  • Basler Electric SR4A-2B16B3E Static Voltage Regulator
  • Basler Electric SR8A2B06B3A STATIC VOLTAGE REGULATOR
  • Hirschmann (Belden)MACH1000, RSPx, RSR and GREYHOUND Power Cord - Schuko 2,5m
  • Hirschmann (Belden)PC150/72V/48V-IP67 DC/DC converter with 48 V power output
  • Hirschmann (Belden)RPS 260/PoE EEC 48 - 56 V DC rail power supply unit
  • Hirschmann (Belden)RPSS120-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS480-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)PC150/110V/54V DC/DC converter with 54 V power output
  • Hirschmann (Belden)RPS 80 EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS75-24V EEC 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 15, Rail Power Supply 24 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPSS240-48V EEC 48 V DC DIN rail power supply unit
  • Hirschmann (Belden)RPS 120 EEC 24 V DC DIN rail power supply unit
  • GE Energy MVDL1000-47931101 Power Conversion Module 690V 1000A
  • GE Energy MVDL8 00-479 3110 1-A Power Conversion Delta Module for MV3000 Drive
  • METSO D201925 ACN CS Controller Module DCS DNA System Processor
  • Hirschmann GMM20-MMMMMMMMSZ9HHS9 GREYHOUND1042 Fast Ethernet media module
  • Hirschmann GRS1042-6T6ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTLL12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZTHH12VYHHSE3AMR Modular managed Industrial Switch
  • Hirschmann GRS1042-AT2ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRS1042-6T6ZSHH00Z9HHSE2A99 Modular managed Industrial Switch
  • Hirschmann GRM20-ZZZZZZZZSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-ZZZZTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-TTTTTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMTTTTSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRM20-MMMMMMMMSZ9HHS GREYHOUND Fast Ethernet Media Module
  • Hirschmann GRS1030-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1030-16T9SMMV9HHSE2S 16 x FE TX + 4 x FE/GE Combo + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-8T8ZSMMV9HHSE2S 8 x FE TX + 8 x FE SFP + up to 8 x FE ports via additional media modules
  • Hirschmann GRS1020-16T9SMMV9HHSE2S 16 x FE TX + up to 8 x FE ports via additional media modules
  • GE UCECH1A UCSE Mark VIe Controller
  • GE IS420UCSEH2C UCSE Mark VIe Controller
  • GE IS220UCSBH4A UCSE Mark VIe Controller
  • GE IS220UCSBH3A UCSE Mark VIe controller module
  • GE IS220UCSBH1A UCSE Mark VIe controller module
  • GE IS420UCSEH2B UCSE Mark VIe controller module
  • GE IS420UCSEH2A UCSE Mark VIe controller module
  • Hirschmann Basic Switches - RSB20-0900VVM2SAABHH Ethernet/Fast Ethernet-Switch
  • Hirschmann BXP62-28TX-EECC-HV-3A-BP HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A-BP BXP HiOS 2A
  • Hirschmann BXP62-20TX-EECC-HV-3A-BP HiOS 3A
  • Hirschmann BXP62-20TX-EECC-HV-2A HiOS 2A BXP
  • Hirschmann BXP62-28TX-EECC-HV-3A HiOS 3A BXP
  • Hirschmann BXP62-28TX-EECC-HV-2A HiOS 2A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-3A BXP Switches
  • Hirschmann BXP62-20TX-EECC-HV-2A-BP BXP Switches
  • Hirschmann RSB20-0900VVM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900MMM2TAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900S2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0900M2TTAAB Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800S2S2TAABE Ethernet Switch RSB20 Series
  • Hirschmann RSB20-0800M2M2TAAB Ethernet Switch EEC MM SC RSB20 Series
  • Hirschmann RSB20-0800T1T1TAAB Ethernet Switch EEC RSB20 Series
  • Hirschmann RSB20-0900VVM2SAAB Ethernet Switch 942014008 RSB20 Series
  • Hirschmann RS30-2402O6O6SDAE Ethernet Switch; Managed; Enhanced; 24xRJ45; 2x1Gig Fiber; 943434039
  • Hirschmann RSB20-0900MMM2SAAB Ethernet Switch 942014007
  • Hirschmann RSB20-0900S2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0900M2TTSAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, MM SC, RSB20 Series
  • Hirschmann RSB20-0900ZZZ6SAAB Ethernet Switch, Managed, 9 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann RSB20-0800S2S2SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, SM SC, RSB20 Series
  • Hirschmann RSB20-0800M2M2SAAB Ethernet Switch
  • Hirschmann RSB20-0800T1T1SAAB Ethernet Switch, Managed, 8 Port, 12 to 24 VDC, RSB20 Series
  • Hirschmann 4C4C4C4C999 16 RJ45/SFP Combo Ports (support 100 and 1000 Mbit/s SFP)
  • Hirschmann MAR1142 Full Gigabit Ethernet Switch with Ports on the rear, PoE
  • Hirschmann MAR1140 Full Gigabit Ethernet Switch with Ports on the rear
  • Hirschmann MAR1042 Full Gigabit Ethernet Switch with PoE
  • Hirschmann MAR1132 Gigabit Ethernet Uplink with Ports at the bcak and 4 Ports PoE
  • Hirschmann MAR1130 Gigabit Ethernet Uplink with Ports at the bcak
  • Hirschmann MAR1032 Gigabit Ethernet Uplink with 4 Ports PoE
  • Hirschmann MAR1122 Fast Ethernet Uplink with Ports at the back and 4 Ports PoE
  • Hirschmann MAR1120 Fast Ethernet Uplink with Ports at the back
  • Hirschmann MAR1022 Fast Ethernet Uplink with 4 Ports PoE
  • Hirschmann MACH 1040 Full Gigabit Rack Mount Switches
  • Hirschmann MAR1030 Ruggedized managed Ethernet Switches, 19" cabinet mount