5. No field‑serviceable internal parts. Return faulty unit to Hirschmann‑Belden service centre.
4.2 Hazardous‑Location Class I Div 2
- Only selected certified GRS hardware variants are eligible for Class I Div 2 non‑incendive location.
- All connectors, terminal blocks **must be plugged / unplugged under power‑OFF**. Component replacement voids hazardous‑location certification.
- USB port and FAULT relay contact must comply with entity‑parameter limits from official control‑drawing 000192283DNR.
4.3 Available Certifications
- Base: CE EMC, RoHS, FCC Class A.
- Optional industry approvals: ISA 12.12.01 (Class I Div 2), IEC 61850‑3 / IEEE 1613 (power substation), EN 50121‑4 (rail‑track‑side), DNV‑GL (marine ship‑board).
- Laser safety: Class 1 laser product. Note: Class A EMC device may cause radio interference in residential environments.
5. Step‑by‑Step Installation Procedure
1. Unpack hardware and inspect for transport damage, verify delivery scope.
2. Connect protective‑ground screw first.
3. Choose mounting option:
- 19‑inch rack‑mount: Install sliding support rails (recommended for heavy‑vibration environment). Secure device brackets to cabinet.
- Wall‑mount flat‑surface: Add extra mounting brackets, deploy fire‑proof housing.
4. (Optional) Insert Hirschmann‑qualified SFP transceivers.
5. (Optional) Hot‑plug media‑expansion module, lock lever and fasten screws.
6. Wire power terminal‑blocks and FAULT‑signal relay terminals, apply specified torque. Re‑insert terminal blocks into device.
7. Power‑on unit, device runs self‑test routine.
8. Attach Ethernet copper / fiber cables. EMC best‑practice: Separate power and data cables; avoid long parallel routing, cross cables at 90‑degree angle whenever practical.
9. Fill‑in MAC‑address / IP‑address inscription‑label on front panel.
> Disassembly reverse order: Remove all data cables → cut power supply → take out terminals → remove SFP / media‑module
→ **disconnect protective‑ground lastly** → unmount hardware.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved