Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

GE Mark VIe Series IS200TVIBH2B Vibration Terminal Block

From:GE | author:Mr.Chen | Time :2024-08-09 | 477 view: | 🔊 Click to read aloud ❚❚ | Share:

Vibration Terminal Board IS200TVIBH2B General Electric's Mark VIe series, which interfaces with VVIB boards, must maintain the same functionality. This board can be connected to up to three VVIB boards in the same series.

GE IS200TVIBH2BBB The IS200TVIBH2B is a turbine control line module.

It is a high-performance, high-reliability module designed to meet the demanding requirements of turbine control applications.

The module is designed for use in a variety of applications including power generation, oil and gas, and petrochemicals.

The vibration termination board IS200TVIBH2B is one of the boards in the Mark VIe control system designed by General Electric.

This board is not compatible with any of the boards in the Mark VIe family, with the exception of the VVIB board. This board will have similar functionality to the TVBA board.

This board can be used not only in Mark VIe systems but also in Mark VI systems.

When the TVIB board is used in a Mark VI system, it can be supported in a TMR or Simplex system.

Up to two panels can be used to connect to the VVIB board. When this board is used in a TMR system, a single TVIB board will connect to three VVIB boards.

The IS200TVIBH2B board does not have any potentiometers and does not require any calibration.

On the face of the board, there are sixteen jumper switches that can be modified to suit the user's needs. There are two barrier terminals for different types of vibration.

Technical Specifications

Number of I/O channels: 16

Input Type: Analog

Input range: 0 to 10 V

Output type: analog

Output range: 0 to 10 V

Accuracy: 0.1%

Resolution: 12 bit

Sample rate: 100 kHz

MTBF: Over 100.000 hours

APPLICATIONS

Power Generation

Oil & Gas

Petrochemical

Chemical

Food & Beverage

Pharmaceuticals

Water and Wastewater

More product recommendations are listed below:

Baldor BSM90A-2150AA

Emerson MVME55006E-0163R

Honeywell CC-TUIO01

GE 369-LO-0-M-0-0-0-E

ABB 87TS01L-E/R1313 GJR2368900R1313

benlty 176449-04

Zellweger 05701-A-040

abb kuc711ae101 3bhb004661r0101

ABB 3BHB003688R0101

Emerson FLOBOSS S600+

bently 3500/42-09-05 128229-01

pioneer magnetics pm3326b-6-1-2-e 80026-529-01

ABB 802A028D-3

ProSoft DFNT-PDPS

Honeywell 05701-A-0302 with 05701-A-0284 only

ABB 802A028D-3

Bently 128229-01 Small Card

Honeywell LG1093AC01

Honeywell SC-UCMX01 51307195-175

Metso D201925

  • Beckhoff ED2504 | EtherCAT Terminal, 4-channel PWM output
  • Beckhoff EL2262 | EtherCAT Terminal, 2-channel digital output
  • Beckhoff EL2258 | EtherCAT Terminal, 8-channel digital output
  • Beckhoff EL2252 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp
  • Beckhoff EL2212 | EtherCAT Terminal, 2-channel digital output
  • Beckhoff EL2202-0100 | EtherCAT Terminal, 2-channel digital output
  • Beckhoff EL2202 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate
  • Beckhoff EL2124 | EtherCAT Terminal, 4-channel digital output, 5 V DC, 20 mA
  • Beckhoff EL2088 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, ground switching
  • Beckhoff EL2084 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, ground switching
  • Beckhoff EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
  • Beckhoff EL2044 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, with extended diagnostics
  • Beckhoff EL2042 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 x 4 A/1 x 8 A
  • Beckhoff ED2034 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, push-in, with channel diagnostics
  • Beckhoff EL2034 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, with diagnostics
  • Beckhoff ED2032 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A, push-in, with channel diagnostics
  • Beckhoff EL2032 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A, with diagnostics
  • Beckhoff EL2024-0010 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A
  • Beckhoff EL2024 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A
  • Beckhoff EL2022 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A
  • Beckhoff EL2014 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, with extended diagnostics
  • Beckhoff ELX2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 30 mA, Ex i
  • Beckhoff ED2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, push-in
  • Beckhoff EL2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A
  • Beckhoff EL2004 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A
  • Beckhoff ELX2002 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 45 mA, Ex i
  • Beckhoff EL2002 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A
  • TMEIC TM21-TG Series 2-Pole Generator
  • TMEIC TM21-TG Series 4-Pole Generator for Turbine Drive
  • TMEIC Air-Cooled Type Synchronous Generators
  • TMEIC TMdrive-XL85 Medium Voltage AC Drives
  • TMEIC TMdrive-30 Medium Voltage AC Drives
  • TMEIC TMdrive-MVG2 Medium Voltage AC Drives
  • TMEIC TMdrive-70 Medium Voltage AC Drives
  • TMEIC TMdrive-50 Medium Voltage AC Drives
  • TMEIC TMdrive-MVe2 Medium Voltage AC Drives
  • TMEIC TMdrive-XL80 Medium Voltage AC Drives
  • TMEIC TMdrive-XL75 Medium Voltage AC Drives
  • TMEIC TMdrive-XL55 Medium Voltage AC Drives
  • TMEIC TMdrive-70e2 Medium Voltage AC Drives
  • TMEIC TMdrive-Guardian Medium Voltage AC Drives
  • TMEIC TMdrive®-10e2 DP DC Drives
  • TMEIC TMdrive-DCe2 DC Drives
  • TMEIC Dynamic VAR Compensation – Dyna-VAR™
  • TMEIC PV Inverters SOLAR WARE 2500
  • TMEIC PV Inverters SOLAR WARE 2700
  • TMEIC PV Inverters SOLAR WARE 3200
  • TMEIC Power Plant Controller
  • TMEIC High-voltage motors 21-L series
  • TMEIC MV Motor & Drive Solutions for Power Generation
  • TMEIC AC Motors Rolling Mills
  • TMEIC TMdrive®-70 Medium Voltage 3-Level IEGT System Drive
  • TMEIC TMdrive®-70e2 Medium Voltage 3-Level IEGT System Drive
  • TMEIC TMdrive-MVe2 Reactive Power Control
  • TMEIC TMdrive®-30 Medium Voltage 3-Level IGBT System Drive
  • TMEIC Unified Controller nv Series
  • DEIF MVR-F215 Product description
  • DEIF MVR-F210 Feeder Protection
  • DEIF MVR-F205 Directional Feeder Protection
  • DEIF PPM 300 Protection & power management
  • DEIF RMC-142D Current relay
  • DEIF GPU-3 hydro Generator protection unit
  • DEIF MVR-200 series Medium Voltage Relay
  • DEIF RMC-131D Current relay
  • DEIF MDR-2 Multi-differential relay
  • DEIF AGC 150 ATS: Advanced Generator Transfer Switch for Seamless Power Management
  • DEIF DVC 350 Digital automatic voltage regulator (AVR)
  • DEIF Digital Voltage Controller DVC 550
  • DEIF TAS-331DG AC transducer for active or reactive power
  • DEIF RMV-112D Undervoltage and overvoltage relay
  • DEIF DPS-1 DC Power Supply
  • DEIF DM 400 hydro Integrated systems
  • DEIF DBC-1 Battery charger
  • DEIF CSQ-3 Multi-function synchroscope
  • DEIF CODESYS Features Software - AWC 500 development package
  • DEIF AMC 300 Advanced Programmable Controller
  • DEIF AGI 400 Advanced graphical interface
  • DEIF BRW-2 & BW Analogue illuminated bridge wing indicators
  • DEIF AWC 500 - G59/3 Integrated G59/3 protection turbine controller unit
  • DEIF AWC 500 Advanced Controller
  • DEIF ASK & ASR Measuring transformer
  • DEIF ASC-4 Battery Automatic Sustainable Controller
  • DEIF ASC plant management Automatic sustainable controller
  • DEIF AOP Additional operator panel
  • DEIF AMC 600 Programmable automation controller with EtherCAT based I/O
  • DEIF AL8-2 Alarm panel
  • DEIF AGC 150 Hybrid Advanced Genset Controller
  • DEIF AGC 150 PMS Lite Simple power management controller
  • DEIF AGC 150 Generator Advanced Genset Controller
  • DEIF AGC 150 Remote Display Remote access and control unit
  • DEIF MVR-250 series Medium Voltage Relay
  • DEIF MVR-210 series Medium Voltage Relay
  • DEIF The SGC series
  • DEIF iE 350 Marine Highly flexible and cybersecure intelligent energy controller
  • DEIF iE 250 Marine Versatile and cybersecure intelligent energy controller for maritime applications
  • DEIF iE 150 Marine Simple and effective power management
  • DEIF iE 650 PLC Extreme robust Programmable Automation controller with EtherCAT based I/O
  • DEIF iE 350 PLC Robust right out of the box
  • DEIF iE 250 PLC Versatile and modular intelligent energy PLC controller
  • DEIF XL / BW / BRW-2 Illuminated indicators
  • DEIF SGC 120/121 Single Genset Controllers
  • DEIF Load Sharing Unit LSU-112DG
  • DEIF Automatic Genset Controller AGC-4
  • DEIF DU-2/MKIII Paralleling And Protection Unit 24VDC
  • DEIF AGC-4 Mk II Generator Set Automatic Controller
  • DEIF GPU-3 graphics card Generator protection unit
  • DEIF SGC 410 Single Genset Controller
  • DEIF SGC 110 Single Genset Controller
  • DEIF MTR-3 Multi-sensor
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA 22121 Output modules
  • HIMA 22120 Output modules
  • HIMA 32110 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32103 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32102 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32102 Relay Amplifier – SIL 4 Certified Safety Module
  • 32100 | HIMA 2 Channel Relay Amplifier
  • HIMA 42500 Selection element,2003 voting Logic function modules
  • HIMA 42400 Blocking element, direct and inverted output Logic function modules
  • HIMA 42300 OR element with 2 inputs Logic function modules
  • HIMA 42200 Element combination AND/OR/blocking element Logic function modules
  • HIMA 42100 AND element with S inputs, 1 with OR Logic function modules
  • HIMA 52100 Time Delay Module
  • HIMA 62100 984162100 2-Fold Analog Limit Monitor
  • HIMA 80110 Reset module
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01