Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

GE IC695PNC001 PROFINET Controller Module

From:GE | author:Mr.Chen | Time :2024-09-04 | 286 view: | Share:

This IC695PNC001 is a PACSystems RX3i communications module manufactured by Emerson Automation (formerly GE Intelligent Platforms (GE IP)). This module is a PROFINET controller module used to connect the RX3i system to a PROFINET network. It supports PROFINET version 2.2 General Purpose Class A IO controllers and is compatible with the CPU315 or CPU320 with firmware version 7.0 or later. Each PROFINET controller supports up to 64 devices and up to 8 I/O controllers per network. This PROFINET controller can connect up to 2048 I/O devices or 128 per network. The module has two RJ-45 and two SFP slots and a micro USB connector.

About the IC695PNC001

The IC695PNC001 is a PROFINET controller module. Formerly manufactured by GE Intelligent Platforms (GE IP), the module is now manufactured by Emerson Automation. This PROFINET controller enables the RX3i CPU to send and receive data over a PROFINET network.

The IC695PNC001 is compatible with PACSystem RX320i CPU7 or CPU0 with firmware version 3.315 or higher.The module comes with two (2) RJ-45 and two (2) SFP slots with SFP connectors sold separately. Only one IP address is assigned to these PROFINET ports. Up to four (4) IC695PNC001s may be installed on a single CPU and must be located only on the host rack where the CPU is located. Up to sixty-four (64) I/O devices can be connected to one (1) controller; 128 I/O devices per network, distributed among eight (8) I/O controllers. In addition, up to eight (8) I/O devices can be installed in a single network. The module has configurable data update times of 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms, 128 ms, 256 ms, and 512 ms IC695PNC001.

It occupies a single slot in the chassis and consumes 0.5 A without an SFP device installed and a maximum of 2.2 A with two (1) SFP devices installed, where the SFP device uses 0.35 A. At 5.5 VDC, the module consumes 1.5 A maximum.

In addition to the embedded dual PROFINET ports, the module is equipped with a micro USB connector for communicating with a computer using a command line interface. It must operate over a temperature range of 0-60 degrees Celsius.

The IC695PNC001 controller is a PROFINET controller manufactured by GE Intelligent Platforms/GE Fanuc PACSystems and is part of the RX3i family. This PROFINET controller module helps connect the RX3i PacSystems family of controllers to a high-speed PROFINET LAN.Some of its noteworthy specifications include a single slot, universal backplane support only, and PROFINET 2.2 universal Class A network rating. It operates at 5.5 amps of internal power at 1 volt DC and 3.3 amps at a rated voltage of 0.5 volts DC.The IC695PNC001 PROFINET Controller Module operates over a temperature range of 0 to 60 degrees Celsius, but lower temperatures may be required depending on the location of the PNC001 and the number of SFPs. The module has a micro USB connector for communicating with a computer via a command line interface. It also has 2 SFP cages and 2 RJ-45 port connectors, but the SFP devices can be purchased separately.

Key features of the IC695PNC001 RX3i PacSystems PROFINET Controller or PNC include firmware upgrades through the use of the WinLoader software utility. The controller also features a built-in command line interface that provides partial configuration and direct monitoring using telnet or through a micro USB port. It also supports ring, star, and daisy-chain network topologies.Other features of the IC695PNC001 PNC include an internal clock that matches the RX3i CPU for time-stamped diagnostics. It also features a reboot button to manually restart the PROFINET controller without rebooting the entire system. The USB port on this PNC is designed for system setup and diagnostic purposes only.

IC695PNC001 Frequently Asked Questions

1. Does the IC695PNC001 come with an embedded SFP cage?

No. The SFP cage must be purchased separately.

2. How many I/O devices can be connected to this controller?

Up to 64 devices can be connected to each PROFINET controller.

Technical Description of the IC695PNC001

The GE Fanuc IC695PNC001 PROFINET controller is part of the RX3i PacSystems family.The PROFINET controller (PNC) module connects the RX3i PacSystems family of controllers to a high-speed Profinet LAN.

  • ABB NE810 3BSE080207R1 Network switch
  • ABB NE802 Network switch 3BSE080237R1
  • A-B 4100-234-R Compact Motion Controller
  • GE IS230TNRLH1B Relay Output DINrail Module
  • GE IS220PAICH1B Analog I/O Module
  • GE IS220PAICH1B Analog I/O Module
  • GE IS230TNAIH2C - Analog I/O DIN RAIL Module
  • ABB DAPU100 3ASC25H204 Control board I/O
  • Kongsberg RCU502I 421768 Remote Control Unit (Modular I/O Processor)
  • ABB AC 800PEC PC D237 3BHE028915R0101 / PC D237 A101 CONTROLLER BOARD
  • ABB GVC704AE01 5SHX1060H0001 3BHB003230R0101 Medium voltage inverter
  • ABB Process Panel PP245 3BSC690126R2 PP245B
  • GE Mark VIe & VIeS IS230PCAAH1B - Core Analog I/O Module
  • GE Mark VIe & VIeS IS230PCAAH1A Core Analog I/O Module
  • Emerson PMCSPANA/IH PMC Carrier Installation and Use Manual
  • Emerson PMCSPAN26E-010 Secondary PMC expansion
  • Emerson PMCSPAN26E-002 Primary PMC expansion
  • Emerson PMCSPAN16E-010 Secondary PCI expansion
  • Emerson PMCSPAN16E-002 Primary PCI expansion
  • A-B 1783-HMS4C4CGN Stratix 5400 Ethernet Managed Switches
  • A-B 1783-RA5TGC4G Stratix 4300 Remote Access Routers
  • A-B 1783-CMS10DP Stratix 5200 Ethernet Managed Switches
  • A-B 1783-CMS20DP Stratix 5200 Ethernet Managed Switches
  • A-B 1783-CMS20DP Stratix 5200 Ethernet Managed Switches
  • A-B 1783-HMS8S4CGN Stratix 5400 Ethernet Managed Switches
  • A-B 1783-CMS6B Stratix 5200 Ethernet Managed Switches
  • A-B 1783-RA5TGW Stratix 4300 Remote Access Routers
  • A-B 1783-RA2TGWC4G Stratix 4300 Remote Access Routers
  • A-B 1783-US8T/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US5TG/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-RA2TGW Stratix 4300 Remote Access Routers
  • A-B 1783-US8T/A Stratix 2000 Ethernet Unmanaged Switches—Series A
  • A-B 1783-US6T2F/A Stratix 2000 Ethernet Unmanaged Switches—Series A
  • A-B 1783-US4T1F Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US5TG Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US4T1H Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US6T2TG2H Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US5T/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US6T2TG2F Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US6T2H/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US4T1H/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US14T2S Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US6T2F Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US7T1H Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US16T2S Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-RA2TGC4G Stratix 4300 Remote Access Routers
  • A-B 1783-US16T/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US7T1F/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-RA2TGB Stratix 4300 Remote Access Routers
  • A-B 1783-LMS5 Stratix 2500 Ethernet Lightly Managed Switches
  • A-B 1783-US7T1F Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US4T1F Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US16T Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US8T Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US6T2H/A Stratix 2000 Ethernet Unmanaged Switches—Series A
  • A-B 1783-US4T1F/B Stratix 2000 Ethernet Unmanaged Switches—Series B
  • A-B 1783-US8TG2GX Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US6T2H Stratix 2000 Ethernet Unmanaged Switches
  • A-B 1783-US5T 5 Port Unmanaged Switch
  • MOOG D138-002-002 Industrial Control Module
  • MOOG D138-003-001 Industrial Control Module
  • MOOG CA98502-001 Accessories for Ruggedized Motion Controller
  • MOOG D691-078D servo valve
  • MOOG CA65866-001 MSD Motion Controller
  • MOOG C43148-001 QD10 16/16 Digital l/0 module
  • MOOG D138-002-012 Main control unit
  • MOOG CA94286-001 Accessories for Ruggedized Motion Controller
  • MOOG D136-001-008 MSCI MSD Motion Controller
  • MOOG B95906-001 MSCI Motion Controller
  • MOOG B95865-001 CAN Termination Resistors
  • MOOG QEBUS-CAN Module
  • MOOG D136-003-001 Interfaces of Ruggedized Motion Controller
  • MOOG RDI0 16/16 Digital Module
  • MOOG D136-003-004 Interfaces of Ruggedized Motion Controller
  • MOOG D391-001-003 MSD MOTION CONTROLLER
  • MOOG D138-002-003 Industrial Control Module
  • MOOG MSC-R-10 16/8 Digital and PT100 Module
  • MOOG CB08987-001 Ruggedized Motion Controller
  • MOOG RDISP 22 Operator Panel DISPLAYS
  • MOOG D136-003-002 Interfaces of Ruggedized Motion Controller
  • MOOG CA65865-001 MSCl Motion Controller
  • MOOG B95863-001 CAN Connection Cables
  • MOOG QA10 16/4 Analog Module
  • MOOG D136-006-001 EtherCAT slave interface
  • MOOG D391-001-001 MSD MOTION CONTROLLER
  • MOOG D136-003-005 Interfaces of Ruggedized Motion Controller
  • MOOG D137-004-003 TFT Touch screen display
  • MOOG D138-002-003 Industrial Control Module
  • MOOG D138-003-010 Industrial Control Module
  • MOOG CB03223-001 Accessories for Ruggedized Motion Controller
  • MOOG B95864-001 CAN Termination Resistors
  • MOOG QD10 16/16 Digital Module
  • MOOG D391-001-002 MSD MOTION CONTROLLER
  • MOOG D138-001-010 Industrial Control Module
  • MOOG D138-001-005 Industrial Control Module
  • MOOG D138-001-002 Industrial Control Module
  • MOOG D138-001-001 Industrial Control Module
  • MOOG D137-002-001 Digital I/O modules
  • MOOG QEBUS-CAN Extension module
  • MOOG D137-001-010 Connection modules
  • MOOG D137-001-004 Digital I/O modules for E-Bus
  • MOOG D137-001-007 Digital extension module
  • MOOG G391-001-001 MSD Motion Controller
  • MOOG D138-002-001 Motion Controller
  • MOOG D137-004-004 TFT Touch screen display
  • MOOG D136-002-005 Ruggedized Motion Controller Interface
  • MOOG D137-001-006 Digital extension module
  • MOOG D136-002-004 Ruggedized Motion Controller Interface
  • MOOG D137-004-006 TFT Touch screen display
  • MOOG G391-001-002 MSD Motion Controller
  • MOOG D137-004-005 TFT Touch screen display
  • MOOG D137-001-005 Digital extension module
  • MOOG D136E001-001 Programmable Processor Module
  • MOOG D138-006-001 operation panel
  • MOOG G122-829-001 Programmable Processor Module
  • MOOG G761-3002B Industrial servo valves
  • MOOG T161-902A-00-B4-2-2A Servo Controller
  • MOOG M128-010-A001B DC Power Module
  • MOOG G391-001-003 MSD Motion Controller
  • MOOG D138-002-002 Motion Controller
  • MOOG D137-001-011 Digital extension module
  • MOOG D136-002-003 Ruggedized Motion Controller Interface
  • MOOG D136-002-002 Ruggedized Motion Controller Interface
  • MOOG D136-001-008a Ruggedized Motion Controller Interface
  • MOOG D136-001-007 Ruggedized Motion Controller Interface
  • MOOG D136-001-001 Ruggedized Motion Controller Interface
  • MOOG 914-GBE Gigabit Ethernet (GbE) Media Converter
  • MOOG 914-0300-00 ADVANCED MODULAR MULTIPLEXER SYSTEM