GE Fanuc IC695NKT002 Component Ethernet Network Interface Unit

DESCRIPTION: This IC695NKT002 is a PACSystems RX3i component manufactured by Emerson Automation (formerly GE Intelligent Platforms (GE IP)). The module is a packaged product consisting of one (1) Ethernet NIU with catalog number IC695NIU001 and two (2) Ethernet Interface Modules with catalog number IC695ETM001. This kit simplifies the ordering system and ensures that complete components are ordered.

About the IC695NKT002

The IC695NKT002 is a component of the PACSystem RX3i product, commonly referred to as a kit. It consists of one (1) Ethernet NIU with catalog number IC695NIU001 and two (2) Ethernet Interface Modules with catalog number IC695ETM001. All modules in this kit are manufactured by Emerson Automation and were previously manufactured by GE Intelligent Platforms (GE IP).

The IC695NKT002 component is used to allow the PACSystem RX3i platform to communicate with 90-30 series modules or VersaMax modules and controllers. This provides an alternative method of migrating to a newer controller platform without completely replacing the system, sometimes referred to as a phased or partial migration.

The primary function of the IC695NIU001 is to provide connectivity to existing 232-485 series I/O modules via embedded serial interfaces that support RS90 and RS30 connections. These ports are compatible to be configured through the application “C” block for Modbus RTU Slave, SNP, Serial I/O, Modbus RTU Master, which are legacy Series 90-30 communication protocols used to communicate with devices and I/O modules.

This IC695ETM001 is used to communicate with other PAC systems, devices, Series 90-30. and VersaMax controllers via Ethernet communication ports. These ports implement TCP/IP connectivity over a four-layer TCP/IP stack using GE Fanuc SRTP and Ethernet Global Data (EGD) protocols.

Components for the IC695NKT002 can be purchased separately. Additional accessories are also available, such as real-time clock (RTC) batteries with catalog number (IC690ACC001), miniconverter kits with cables, RS-485/RS-232 (IC690ACC901), RS-485 port isolator (IC690ACC903), and RS-232 cables (IC200CBL001), among other components. .

Older entries describe the NIU only, not the kit.

IC695NKT002 Frequently Asked Questions

1. What is in the IC695NKT002?

The IC695NKT002 kit contains one (1) Ethernet NIU with catalog number IC695NIU001 and two (2) Ethernet Interface Modules with catalog number IC695ETM001.

2. What controller platforms are supported by the IC695NKT002?

The IC695NKT002 supports the PACSystem RX3i and 90-30 series PLC platforms.

IC695NKT002 Technical Description

The GE Fanuc IC695NKT002 Ethernet Network Interface Unit is part of the RX3i PacSystem product line. It can be used remotely with RX3i PacSystem Series I/O and 90-30 Series I/O via Ethernet.