GE Fanuc IC660BBA100 Analogue Input/Output Module

Product Description

The IC660BBA100 analogue input/output module is a 115 volt AC from GE Fanuc,

4-input and 2-output analogue block from GE Fanuc. It has a 12-bit resolution, 4 ms update time, and 7 watts of thermal power dissipation. It weighs 4 lbs.

The IC660BBA100 analogue input/output module is part of the GE Fanuc 90-30 series of input/output modules.

It has 4 input circuits and 2 output circuits.

This analogue I/O module with nominal voltage and current offers 5 analogue power ranges: 0 to 10 volts DC,

+/-10 volts dc, +/-5 volts dc, 0 to 5 volts dc, and 4 to 20 mA.

The IC660BBA100 analogue input/output block also provides an optional input filter time of up to 1024 milliseconds.

Each output can be left in its final state or at its default value if the communication process is interrupted.

It is backward compatible with its earlier versions, as well as with the GE family of IC697. IC600. and IC550 PLCs.

Replacing the module's electronics eliminates the need to change the module's field wiring and configuration.

The IC660BBA100 analogue input/output module has a 12-bit analogue-to-digital converter that converts the input signal current or voltage to a digital value.

The converted signal can be scaled to an integer for representation in engineering units.

The output circuitry is connected to a 12-bit digital-to-analogue converter, which converts the processed value to a voltage or current output signal.

The IC660BBA100 analogue I/O block also automatically calibrates the 2 converters to ensure accurate performance.

It transmits 8 bytes of input data and 4 bytes of output data during each bus scan.

The user can monitor the input and output values in integer form via a handheld monitor.

Connect AC power to terminals 6 and 7 to supply power to the module.

Be sure to connect a 250 volt, 1/8 amp fuse in series with the power connector.

The 2 LED status indicators on the panel show the status of the module.